Operation Manual

6
CAUTION:
Do not wipe plastic components, e.g. instrument panel, headlight, with organic solvents such as
gasoline…etc to avoid damaging these components.
The panel figure for speedometer may vary from model to model, but the location usually are the
same.
7.
USE OF EACH COMPONENT
(The following is 4 stroke air cooling 125 c.c. bike’s basic operation, and they could vary
from different individual models. Please consult the end of this manual.)
§ GAUGES §
Ÿ Speedometer:
Indicates driving speed（km/h）.
Ÿ Odometer:
Indicates total accumulated distance traveled.
Ÿ Trip Kilometer:
The rider can measure the trip kilometers. It
shows four digits; 3 in kilometers and 1 in
hundred meter. (The trip kilometer will return
to zero if its measurement is over 1000
kilometers or turn the reset knob.)
Ÿ Tachometer:
Indicates engine rpm.
Ÿ High Beam Indicator:
This indicator comes on with high beam
headlight is turned on.
Ÿ Turn (left/right) Signal Indicator:
The left or right Indicator will be flashing
according to the operated directions of turn
signal light switch when it is turned on.
Ÿ Transmission Neutral Indicator:
This indicator shows transmission neutral.
Ÿ Gear Position Indicator:
This indicator comes on with gear position.
Ÿ Fuel Meter:
The pointer in this meter shows how much
fuel remains in the tank.
The pointer stays in “E” position when key
switch is turned to “OFF”.
When the meter needle reaches “E” with the
ignition switch on, refill the tank as soon as
possible.
High Beam
Indicator
Tachometer
Odometer
Speedometer
Turn Signal
Indicator
Transmission
neutral Indicator
Trip kilometer
reset knob
Trip kilometer
Gear position
indicator
Fuel meter
Turn Signal
Indicator