Operation Manual

10. Inspection and maintenance before riding

OIL FILTER CLEANING

The oil filter in engine left side, near change pedal.

Open the filter nut assembly of the filter, and remove the

filter. Remove the foreign materials from the filter by using

a gasoline or air spraying gun.

WARNING:

 Oil level will not be correct when checking the oil

level with the motorcycle parked on an unleveled

ground or immediately after the engine stopped.

 Engine and exhaust pipe are hot right after engine

stopped. Pay special attention not to get burned

when checking or replacing engine oil.

 If the oil lever approach lower limit again after

refilled, check the engine for leaks and refill it

again.

 There is a powerful magnet inside and be sure to

don’t lose it anyway.

OIL PAPER FILTER CHANGE

WARING:

 Exchange the oil paper filter and O-ring as

well.

Oil filter

Filter nut

powerful

magnet

oil paper

filter

ring