Operation Manual

9.Riding the motorcycle

RIDING IN GRADE

Up Grade

Riding up a slightly grade can ride with high position gear.

Under heavy loading or steep grade riding condition, It must

ride with low gear.

Down Grade

Close the throttle and operate the brakes when riding down a

slight grade. Shift the gear to low gear in case of heavy

loading or riding down steep grade condition.

CAUTION:

 Braking apply both the front and rear brakes.

TRANSMISSION OPERATION

 The change pedal is located on the left side of the engine. Shift transmission to the lower gear

when driving hard or down grade.

 Squeeze the clutch lever fully, operate change pedal to the proper position, then release the

clutch lever to make a gear change.

 Don’t operate the transmission when the engine is not running.

 Don’t operate change pedal rudely, or the transmission will be damaged.

 Shift the gear to the next lower position for overtaking other vehicles.

CORRECT RIDING

Optimum Start Riding

 Turn on the turn signal and make sure of no

vehicle coming behind before start riding.