Operation Manual

9.Riding the motorcycle

SET UP RIDING

Check the brakes and tire pressure before riding.

1. Squeeze the clutch lever fully, then push shift

pedal down to engage the 1st gear.

2. Then release the clutch lever slowly, and at the same time, open the throttle gradually, the

motorcycle will move.

CAUTION:

 After the engine was started and before riding, don’t operate the throttle to rise up the engine

speed.

 Change the gear position according to the driving speed.

 The relationship between speed and gear position is on the right table.

 Change the gear position according with the table can get the good performance

and fuel economy of the motorcycle.

CAUTION:

During the first 1,000km, it is better to drive in low speed for running the engine in good condition

and long life.

 Change the engine oil and clean the oil filter element after first 300km.

 It is better to drive in low speed after replacing the engine.

 Warm up the engine before start riding.