Operation Manual

7. Use of each component
13
• Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal lights
will flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
• Engine Stop Switch
Switch to this position to turn off the engine when a state of emergency.
Switch to this position and the engine can be started.
• High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
• Passing Switch
Turn ignition switch “ON” and press this button down. Then, the high beam of headlight will come
on immediately to warn the driver of the vehicle ahead that you intend to overtake him/her. (For
overtaking, high beam indicator will come on at this time) This button will return to original position
after releasing.
High
/
Low
Beam Switch
Engine Stop
Switch
PASS