Installation Instructions

2. Maintenance Information
2-1
Precautions in Operation ···················· 2-1
Periodical Maintenance Schedule······ 2-2
Engine Oil············································· 2-3
Engine Oil Strainer Clean···················· 2-3
Gear Oil················································· 2-4
Fuel Lines / Cable ································ 2-4
Air Cleaner ··········································· 2-5
P.C.V. System ······································ 2-6
Valve Clearance ··································· 2-6
Spark Plug············································ 2-7
Cylinder Compression Pressure ········ 2-8
Drive Belt ·············································· 2-8
Steering Handle Top Bearing·············· 2-9
Cushion ················································ 2-9
Disk Brake System······························· 2-10
Brake Light Switch / Start Switch······· 2-12
Wheel / Tire··········································· 2-12
Battery ·················································· 2-13
Nuts, Bolts Tightness ·························· 2-13
Special Tools List ································ 2-14
Precautions in Operation
Model LX40A1-6 / F
Fuel Tank Capacity 14,200±500 c.c.
capacity 2,000 c.c.
change (with oil filter
replaced)
1,900 c.c.
Engine Oil
change 1,800 c.c.
capacity 350 c.c.
Transmission
Gear oil
change 330 c.c.
Engine + radiator 1400 c.c.
Capacity of
coolant
Reservoir upper 350 c.c.
Clearance of throttle valve 2~6 mm
Spark plug CR8E (gap:0.6~0.7 mm)
Timing advance idle speed BTDC 10º / 1,550 rpm
Idling speed 1,550±100 rpm
Cylinder compression pressure 12.5 ± 2 kgf/cm²
IN 0.10±0.02 mm
Valve clearance
EX 0.12±0.02 mm
Tire dimension Front 120/70-15 56S
Tire dimension Rear 160/60-14 65H
single Front: 2.00 kg/cm² Rear: 2.25 kg/cm²
Tire pressure
(cold)
Load 90 Kg (full load) Front: 2.00 kg/cm² Rear: 2.50 kg/cm²
Battery 12V11.2Ah (MF battery) / TTZ14S
Home page
Contents
2