Installation Instructions

2. Maintenance Information
2-10
Steering Handle Top Bearing
Caution
● Check all wires and cables if they are
interfered with the rotation of steering handle
bar.
Lift the front wheel out of ground.
Turn handle from right to left alternative and check
if turning is smoothly.
If handle turning is uneven and bending, or the
handle can be operated in vertical direction, then
adjust the handle top bearing.
Cushion
Caution
y Do not ride the motorcycle with poor cushion.
y Looseness, wear or damage cushion will
make poor stability and drive-ability.
Front cushion
Press down the front cushion for several times to
check it operation.
Check if it is damage
Replace relative parts if damage found.
Tighten all nuts and bolts.
Rear Cushion
Press down the front cushion for several times to
check it operation.
Check if it is damage
Replace relative parts if damage found.
Park motorcycle with main stand.
Turn the rear wheel forcefully and check if engine
bracket bushing worn out
Replace the bushing if looseness found.
Tighten all nuts and bolts.
To this chapter contents