Installation Instructions

2. Maintenance Information
2-2
Periodical Maintenance Schedule
No item
Every
300KM
1 Month
every
1,000KM
3 month
every
3,000KM
6 month
every
6,000KM
1 year
every
12,000KM
1
☆Air cleaner I C C R
2
☆2nd air jet leaner I C C R
3
☆Fuel filter I I R
4
☆Oil filter C C C
5
☆Engine oil change
R Replacement for every 1,000 km
6 Tire pressure
I I I I I
7 Battery inspection
I I I I I
8 Brake & free ply check
I I I I I
9 Steering handle check
I I I
10 Cushion operation check
I I I
11 Every screw tightening check
I I I I I
12 Gear oil check for leaking
I I I I I
13
☆Spark plug check or change I I R R
14
☆Gear oil change
R Replacement for every 5,000 km
15 Frame lubrication
L L
16 Exhaust pipe
I I I I I
17
☆Ignition timing I I I I I
18
☆emission check in Idling A I I I I
19
☆Throttle operation I I I I
20
☆Engine bolt tightening I I I I
21
☆CVT driving device(belt﹞ I R
22
☆CVT driving device(roller) C C
23 Lights/electrical equipment/multi-meters
I I I I I
24 Main/side stands & springs
I I I
25 Fuel lines
I I I I
26 Shock absorbers
I I I
27 Cam chain
I I
I
I
28
☆Valve clearance I A A A
29
☆Crankcase evaporative control system I C C C
30
☆Crankcase blow-by over-flow pipe Replacement for every 2,000 km
31
☆2nd air jet system I I C C
32
☆Evaporative control system I I I
33 Lines & connections in cooling system
I I I I I
34 Coolant reservoir
I I I I I
35 Coolant
I
Replacement for every 1 year
Code: I ~ Inspection, cleaning, and adjustment R ~ Replacement C ~ Cleaning (replaced if necessary) L ~ Lubrication
Have your motorcycle checked, adjusted, and recorded maintenance data periodically by your SYM Authorized Dealer to
maintain the motorcycle at the optimum condition
The above maintenance schedule is established by taking the monthly 1,000 kilometers as a reference which ever comes first.
Remarks: 1. These marks “☆” in the schedule are emission control items. According to EPA regulations, these items must be
performed normally periodical maintenance following the use r manual instructions. They are prohibited to be
adjusted or repaired by unauthorized people. Otherwise, SYM is no responsible for the charge.
2. Clean or replace the air cleaner element more often when the motorcycle is operated on dusty roads or in the
Heavily- polluted environment.
3. Maintenance should be performed more often if the motorcycle is frequently operated in high speed and after the
motorcycle has accumulated a higher mileage.
4. Preventive maintenance
a. Ignition system－Perform maintenance and check when continuous abnormal ignition, misfire, after-burn, overheating occur.
b. Carbon deposit removal－Remove carbon deposits in cylinder head, piston heads, exhaust system when power is obvious
lower. Than ever
c. Replace worn out pistons, cylinder head.
To this chapter contents