Installation Instructions

14. Brake System
14-4
Disk Brake System Inspection
Inspection
By visual examination whether divulges or the
damage, with spanner inspection brake tube seam
whether becomes less crowded, and the
inspection handle bar turn right or turn left, or
pressure the cushion, whether besides the
pipeline protection department, whether there is
interferes, contacts other parts of.
Remove the front brake pad cap.
Check the brake from behind the brake caliper.
The brake pad must be replaced with new lining
when the brake pad wear limit reaches the brake
disk.
Park the motorcycle on a level ground, and check
if fluid level is under the “LOWER” mark.
Recommended Brake Fluid: WELL RUN BRAKE
OIL (DOT 3).
Caution
y The vehicles inclined or just stop, the survey oil
level could not be accurate, had to settle the
3~5 minute.
y In order to prevent has the chemical change,
please do not use counterfeiting or other
unclear trade marks brake fluid.
y Uses by all means must with the trade mark
brake fluid, guarantees the ghost vehicle
efficiency.
Brake caliper
Brake disk
To this chapter contents
Brake linings wear limit grooves
Brake linings wear limit grooves