Operation Manual

15
5. Use of Each Component
BATTERY CHARGER USAGE NOTES
Usage Method：
：：
：
1. Insert the charger output plug into the charging terminal on the battery.
2. Connect charger cable plug “A” to AC power, and connect charger cable “B” to the charger.
3. Turn on charger power switch.
4. Check LED status indicator.
5. When the battery is fully charged, the green light is on.
CAUTION:
 Make sure the power switch on “OFF” position while connecting and removing charger cable.
 Use the battery charger indoors; avoid hot, humid or dusty environment.
WARNING:
 Prevent the charger from striking, pressing, and falling.
 Use the charger indoors. Do not place the charger in the luggage box to avoid shocking and moisture.
 Do not place the charger in the luggage box while charging to avoid heat.
 Keep children away while charging.
 Please park the vehicle along the wall or in the corner while charging to avoid tripping people.
LED Indicator
LED Orange Green Red Flash No Light
Mode Charging Fully Charged Abnormal
Cable disconnect or power
switch off
LED Red Flash:
Low input voltage, fan malfunction, over-heat protection, battery disconnection, battery low voltage,
charger over voltage protection, overtime charging, battery malfunction
Status Indicator
Charger
Power Switch
Power Input
Socket
Charger Cable
B
A