Operation Manual

13
5. Use of Each Component
STEPS FOR CHARGING THE BATTERY
1. Turn off main switch 2. Keep charger switch on “OFF”
position
3. Open luggage box
4. Open charging cover
5. Connect charging terminal
(Note: Be aware the direction of
the charging terminal)
6. Connect the charger to
AC100V-240V
7.Turn the charger switch to “ON”
position.
8.The charger will show orange
light (charging) or green light
(fully charged).
9.The gauge will show the
battery power while charging.
Note: If the charger shows no light or flashes red light, please check the charging terminal and turn on
the switch again. If the charger light still shows no light or flashes red light, please contact your
SYM dealer.