Operation Manual

5. Use of Each Component

BATTERY CHARGING INSTRUCTION

Steps for charging battery on vehicle:

1. Open the saddle

2. Insert the power cable of the charger to socket (100V-240V)

3. Connect output cable of the charger and the charging terminal of the vehicle

4. Turn the charger on to charge the battery

Steps for removing the charger:

Reverse the steps of charging.

CAUTION:

 Power remaining more than 50%, continuous 14 days without operating, the battery will

automatically be in hibernation mode.

 Power remaining 15%-50%, continuous 7 days without operating, the battery will automatically be in

hibernation mode.

 Power remaining less than 15%, continuous 2 days without operating, the battery will automatically

be in hibernation mode.

 If the battery is in hibernation mode, you have to charge and reactivate the battery before using.

 If the vehicle will not be operated for a long period of time, it is recommended to fully charge the

battery to maintain the best efficiency and life service.

WARNING:

 Please turn off the power and remove the key before charging to avoid children from injury.

 Do not remove the battery from the vehicle and then charge.

 Please charge the battery at a cool place. Keep the battery from high temperature, sun ray, heat,

fire, and water.

 Please use SYM authorized charger for charging, or the battery may result in electrolyte leakage,

heat, and explosion.

Battery

Charging Terminal