Periodical Maintenance Chart Item First month Every month Every 3 months Every 6 months 1 Motor I 2 Motor Controller I 5 Battery I I 6 Charger I I 7 DC to DC Converter I I 8 Tire I I 9 Tire Pressure I I 10 Brake Clearance I I 11 I I Light / Electrical System / Meter A 12 Electric Throttle Operation I 13 Steering Handlebar 14 Bolt / Screw / Nut Tightness I I I 15 Main Stand / Spring I 16 Suspension / Oil Leakage I 17 Frame Parts Lubrication L 18 Transmission
Maintenance Record 1st month Kilometer Date 2nd month km / / 3rd month km / / 4th month km / / 5th month km / / 6th month km / / km / / Distributor 7th month Kilometer Date 8th month km / / 9th month km / / 10th month km / / 11th month km / / 12th month km / / km / / Distributor 13th month Kilometer Date 14th month km / / 15th month km / / 16th month km / / 17th month km / / 18th month km / / km / / Distributor 19th month Kilometer D
25th month Kilometer Date 26th month km / / 27th month km / / 28th month km / / 29th month km / / 30th month km / / km / / Distributor 31st month Kilometer Date 32nd month km / / 33rd month km / / 34th month km / / 35th month km / / 36th month km / / km / / Distributor 37th month Kilometer Date 38th month km / / 39th month km / / 40th month km / / 41st month km / / 42nd month km / / km / / Distributor 43rd month Kilometer Date 44th
This manual describes the correct usage of this vehicle including safe riding, simple inspection methods and so on. For a more comfortable and safer riding, please read this manual carefully. For your benefit, please ask your SYM dealer the operating manual and read the following： Correct usage of the vehicle. Pre-delivery inspection and maintenance. Usage of warranty, warrant contents, and warranty period.
1. Contents ......................................................................................................................... 1 2. Control Location ............................................................................................................ 2 3. Warranty Method ........................................................................................................... 3 4. Correct Riding Method ...........................................................................................
Headlight / Starter /Horn Switch Luggage Box Front Position Light Turn signal light Horn switch Winker / Luggage Box Lock Rear Turn Signal Light Headlight Frame Number Taillight Battery Side Stand Main Stand Front Brake Lever Rear Brake Lever Main Switch Motor Controller Motor 2 2.
This manual describes the correct usage of this vehicle including safe riding, simple inspection methods and so on. For a more comfortable and safer riding, please read this manual carefully. For your benefit, please ask your SYM dealer the operating manual and read the following： Correct usage of the vehicle. Pre-delivery inspection and maintenance.
Keep your body such as shoulders, arms, palms, and waist relaxed and ride with the most comfortable posture in order to react quickly when necessary. Riding posture will greatly affect riding safety. Always keep your body’s gravity in the center of the seat. If your body’s gravity is on the rear part of seat, the front wheel load will be reduced, and this will cause the steering handlebar shaking. It is dangerous to ride a vehicle with an unstable handlebar.
Basic Controls of SYM e-Virid GAUGES Abnormal Indicator Odometer Energy-saving Mode Turn Signal Indicator Automatic on & off headlight / UV Sensing Window High Beam Indicator Charging Indictor Battery Volume Status Indicator Vehicle Lock Signal Driving Mode SET Button MODE Button Speedometer Speedometer This shows the speed in kilometers per hour (km/h). Odometer This odometer shows the total kilometers this motor has been driven.
SET Button Mode Button Adjustment of SET / MODE Button When key switch is turned to “ ”, Press “MODE” button to change between “TOTAL” and ”TRIP” modes. Under TRIP mode, press “SET” button continuously to reset the TRIP kilometer readings. 6 5.
Energy-saving Mode Vehicle Lock Signal Driving Mode Driving Mode 〞,vehicle lock signal〝 Pull the brake lever then press〝 can switch:〝 〝 〞(normal mode),〝 〞(economic mode),〝 〞will go off, at the mean time you 〞(hill-climbing mode). 〞Vehicle Lock Signal 〞, pull the brake lever and press〝 Signal will go off, then you can ride the scooter.
Battery Volume Status Indicator Battery Volume Status Indicator Turn the main switch to〝 〞 Battery Volume Status Remaining power Condition 90~100% Shows the remaining power is full and at its best durability. 40~50% Show the remaining power is 40-50%. Avoid long distance riding. Shows the remaining power is 1/3, and the 20~30% system will be compelled to 〝 〞economic mode; the max speed is 30km/h.
Operation of Main Switch Magnetic key Main switch keyhole Magnetic key keyhole IGNITION SWITCH Ignition switch key MAGNETIC KEY： ： • • Align magnetic key and magnetic keyhole and turn right to open the main switch keyhole. Align magnetic key and magnetic keyhole and turn left to shut the main switch keyhole. Main Switch “ON” position The motor is on in this position. After unlocking, the scooter is ready for use. removed. The key cannot be “OFF” position The motor is off in this position.
Use of Buttons Light Switches When the switch is turned to this position, all lights will go off. When the switch is turned to this position, headlight, position light, rear light, and panel light will automatically be on or off according to the environment. When the switch is turned to this position, position light, rear light, and panel light will come on. When the switch is turned to this position, headlight, position light, rear light, and panel light will come on.
The Best Method to Start Before start, you should turn on the turn signal, watch the rear side to make sure no vehicle is coming, and then you can start. Braking Avoid unnecessary sudden braking. Use front and rear wheel brakes simultaneously when braking. Slow down and brake early when riding in rainy days on slippery roads. Never apply the brakes suddenly to prevent skidding and falling.
BATTERY CHARGING INSTRUCTION Charging Terminal Battery Charging Terminal Steps for charging battery on vehicle: 1. Open the saddle 2. Insert the power cable of the charger to socket (100V-240V) 3. Connect output cable of the charger and the charging terminal of the vehicle 4. Turn the charger on to charge the battery Steps for removing the charger: Reverse the steps of charging.
STEPS FOR CHARGING THE BATTERY 1. Turn off main switch 2. Keep charger switch on “OFF” position 3. Open luggage box 4. Open charging cover 5. Connect charging terminal (Note: Be aware the direction of the charging terminal) 6. 7.Turn the charger switch to “ON” position. 8.The charger will show orange light (charging) or green light (fully charged). 9.The gauge will show the battery power while charging.
INSTRUCTION OF BATTERY USAGE Specification： ： Type Voltage (V) Capacity (Ah) Li(Ni Co Mn) O2 48 20 Length (mm) Size Width (mm) Height (mm) 393 246 417 Weight (kg) 10.2 Usage Method： ： Turn off main switch before charging. Fully charge the battery before the first ride. Charge the battery after each ride. Charge at least once every 3 months, if the vehicle does not operate for a long period of time. Charge the battery on the vehicle. Do not remove the battery.
BATTERY CHARGER USAGE NOTES Usage Method： ： 1. Insert the charger output plug into the charging terminal on the battery. 2. Connect charger cable plug “A” to AC power, and connect charger cable “B” to the charger. 3. Turn on charger power switch. 4. Check LED status indicator. 5. When the battery is fully charged, the green light is on. CAUTION: Make sure the power switch on “OFF” position while connecting and removing charger cable.
Troubleshooting Detection Item Unable to charge Long time charging without green light on Possible causes Countermeasures Charger power switch off Turn power switch to “ON” Not using SYM authorized battery Using SYM authorized battery Low input voltage Power input 100V~240V Battery deterioration malfunction or Replace battery If problems cannot be eliminated, please contact your SYM dealer.
TIRE INSPECTION Tires should be checked and inflated when the engine is off. If a tire’s ground contacting curve is abnormal, check it with a tire pressure gauge and inflate it to the specified pressure. Tire pressure must be checked with a tire pressure gauge when the tire is cold. CAUTION: If the tire pressure is insufficient, it will affect the riding range of the vehicle and the life span of the battery and motor. Tire pressure inspection is suggested every month.
Checking front brake lining • Check the brake from behind the brake caliper. The brake pad must be replaced with new lining when the brake pad wear limit reaches the brake disk. Checking oil quantity in brake oil reservoir • Park the scooter on a level ground, and check if fluid level is under the “LOWER” mark. Recommended Brake Fluid: WELL RUN BRAKE OIL (DOT 3). Brake caliper Brake pad wear limit grooves Brake disk Replenishment of front wheel brake fluid 1.
INSPECTION AND ADJUSTMENT OF BRAKE FREE PLAY INSPECTION：(Brake lever free play must be checked with the engine off.) Brake lever free play for front and rear wheels. When checking the hand-braking lever for front and rear wheels, its free play (the stroke of hand-braking lever from no braking to initial braking) should be 10~20mm. It is abnormal if the feel is spongy when holding the hand-braking lever forcefully. Adjustment：(Drum type) The indentation of brake adjustment nut must be aligned with the pin.
TRANSMISSION OIL REPLACEMENT • Park the vehicle on level ground, remove infusion and drain bolts, drain out the transmission oil. • Install the drain bolt and tighten it. Fill new 100 c.c. transmission oil; install and tighten the infusion bolt. Make sure bolts are tightened and check for leakage. • Recommend Oil: Genuine SYM HYPOID GEAR OIL(SAE 10W-40) Infusion Bolt • Replace transmission oil on the first 300km, then replace it every 4 months or 2000km. Drain Bolt MAINTENANCE 1.
INSTRUCTION OF MOTOR USAGE Specification： ： Model ED1LU Type DC Brushless Hub Motor Voltage Max Power 48 VDC 2200 W Caution Please avoid overload, steep slope, and long period of power-consuming condition; it may damage battery, motor controller, and motor. Do not spray high pressure water toward motor assembly. Do not ride across the flooded road over 10cm high. Do not disassemble the motor assembly.
Troubleshooting Detection Item Possible Causes Countermeasures Power cable of battery is not connected. Reconnect the power cable and then switch on. Reconnect the inner cable and then switch on. If the coupler is loose, reconnect it. If the coupler is ok, there might be open circuit in the wire harness. Please contact your SYM dealer. Replace the main switch 1 Recharge the battery. Check if the battery voltage is 52V. 2. Replace the battery when the voltage is under 30V after recharging. 1.
e-Virid Model Item Specification ED1LU1-6 ED1LU2-6 ED1LU3-6 length/width/ Height (mm) 81Kg / 1,215 Net Weight/Wheel base (mm) 745 Seat Height (mm) DC Brushless Hub Motor Type Motor Motor Controller Rated Power (W) 1800 W Max. Power (W) 2200W voltage 48 VDC Output Current Max 60 A Type Battery Li(Ni Co Mn) O2 voltage 48 V Capacity (Ah) 20 Ah Quantity 1 Type Charger ED1LU1-F 1,725 / 625 / 1,060 48V 10A Input voltage 100~240 V Output voltage 53.3 VDC 45 Max.
1. How is the SYM electric scooter capability of riding across flooded road? Is the motor waterproof? A: The motor is capable of being drenched, but the waterproof capability is not good when being soaked. Do not ride across the flooded road when the water level is higher than the wheel rim (approximately 10cm high). 2.
