Operation Manual

7.USE OF EACH COMPONENT
9
USE OF BUTTONS
z Light Switches
When the switch is turned to this position, headlight, rear light, instrument panel light, and
position light will go on.
When the switch is turned to this position, all lights will go off. (Depending on Models)
z Electrical Starter Button
This is the electrical starter button, it is used for starting the engine.
When the ignition switch key turns to “ON” and brake lever hold, and then press this
button down to start engine.
《This mechanism is designed for safety. Thus, the front or rear brake lever must be
hold before using this button so that engine can be started.》
CAUTION:
z Release this button immediately after engine has been started, and never press the button again
to avoid damaging the engine.
z Do not use light system. Turn headlight and turn signal lights to the “OFF” position when the
engine is being started.
z High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between
high and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
High / Low
Beam Switch
Turn Signal
Switch
Horn Switch
Light Switch
Electrical Starter
Button