Operation Manual

7.USE OF EACH COMPONENT
10
z Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to “ON”, and slide the turn signal switch to left or right. Then, the turn signal
lights will flash.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.
z Horn Switch
Press this button down when ignition switch is in the “ON” position, the horn will sound.
CAUTION:
z Do not press this button when you are in the no horn area.
SADDLE LOCK
z Unlock:
Engine stopping condition:
Insert your key into the ignition switch push the
key, and turn it to the right. Then, the saddle
can be lifted up.
Engine running condition:
Just turn it to the right then the saddle can be
lifted up
.
CAUTION:
z Please do not put the key into the storage
compartment after saddle is unlocked to
prevent the key from being locked inside
and can not be removed when the saddle
is locked.
z Be sure to remove the key after the saddle
has been locked.
z Lock:
Press the saddle down and push it locks automatically.
SAFETY HELMET HOOK
z Open the saddle, and hook the safety helmet chin belt onto the hook, and then lock the saddle.
CAUTION:
z Please do not hang your safety helmet as usual on the hook when driving, to prevent it from
damaging the vehicle and affecting your driving safety.
STORAGE BOX
 This box is located under the saddle.
 Maximum load capacity: 10kg.
 Do not store valuables in the box.
 Please make sure that seat cushion had been
locked completely after it was down.
 Take out valuables before washing to avoid
wetting these objects.
 Do not place thermal sensitive objects in the
box because of engine’s heat and high
temperature.