Operation Manual

 Engine stop switch

When the ignition switch key is turned to this position, press the electrical starter button, the

engine can be started.

When the ignition switch key is turned to this position, press the electrical starter button , the

engine can not be started.

 Electrical starter button

This is a starting motor button (switch) for engine starting.

With the main switch “on”, press this button while holding the front or rear brake lever will start

the engine.

CAUTION:

 Release this button immediately after engine has been starter, and never press the button again

to avoid damaging the engine.

 This mechanism is a safety design. The engine can only be started after the front or rear brake

lever (pedal) has been applied.

 Do not use light system. Turn headlight and turn signal light to the “off” position when the engine

is being started.

 High/low beam switch

This is the high and low beam of headlight switching switch. Press this switch to switch between high

and beams.

This is for high beam.

This is for low beam.(please turn to low beam riding in city.)