Operation Manual

8
7. Use of each component
USE OF BUTTONS
• Light Switches
When the switch is turned to this position as the engine is being started, headlight, rear light,
instrument panel light, and position light will come on.
Note:
Position Light Function:
This light can indicate the scooter position when the scooter is running in dim, rainy, or foggy weather.
When the switch is turned to this position as the engine is being started, rear light, instrument
panel light, and position light will come on.
When the switch is turned to this position, all lights will go off.
• Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear brake lever will
start the engine.
CAUTION:
• Release this button immediately after engine has been started, and never press the button again
to avoid damaging the engine.
• This mechanism is a safety design. The engine can only be started after the front or rear brake
lever (pedal) has been applied.
• Do not use light system. Turn headlight and turn signal lights to the “OFF” position when the
engine is being started.
High/Low Beam
Switch
Turn signal
switch
Horn switch
Electrical starter
button
Light switch