SRT902A Operation Instruction LCD Color digital TV receiver NOTE: THIS UNIT IS NOT MEANT TO BE USED IN A MOVING VEHICLE. ATSC DIGITAL TUNERS DOES NOT RECEIVE SIGNAL WHEN IN MOTION. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Contents I Precautions 1 II Accessories 2 III Appearance 3 IV Description of Panel Buttons 4 V Remote Controller Operation Instruction 5 VI Basic Operation 7 VII TV Menu Operation 8 7.1. TV/AV Image Quality Adjustment 8 7.2. Sound Adjustment 8 7.3. Time Adjustment 9 7.4. Settings 10 7.5.
I Precautions Storage 1. Keep this product away from extremely hot or cold places. The storage temperature ranges from -40 to 60 and the working temperature from -5 to 40 . 2. Do not use this product at damp environment like bathtubs, wash basins, kitchens, washtubs, as well as basements, swimming pools or similar places. 3. Do not expose your TV set to high humidity, dust or oil smoke. 4. Do not throw or drop this product. 5.
II Accessories 1. Car adapter 2. AC adapter 3. 75 ohm antenna conversion cable(screw connector) 4. Remote control 5. AAA type batteries 6. AV conversion cable 7. Telescopic antenna 8. User manual * Open the package and make sure all the items are included.
III Appearance 1. Telescopic antenna 2. MUTE: Mute button 3. EXIT: Exit button 4. OK: Confirm button 5. MODE: Mode shift button 6. : Standby button 7. TFT-LCD screen 8. CH+/ : Channel Select/ Upward button 9. CH-/ : Channel Select/ Downward button 10. MENU: Menu button 11. VOL+/ : Volume up/ Rightward button 12. VOL-/ : Volume down/ Leftward button 13. Power indicator Red: Standby Flashing green: Charging Persistent: Charged 14. Remote-control receive window 15. Antenna input Jack 16. Power on/off 17.
IV Description of Panel Buttons 1. MUTE: Mute button. 2. EXIT: Exit button. 3. OK: Confirm button. 4. MODE: TV/AV/External storage switch. 5. : Standby button. 6. CH+/ : Upward selection/Channel increasing. 7. CH-/ : Downward selection/Channel decreasing. 8. MENU: Menu button, press to show the main menu. When system enters a multilevel submenu, press to return the previous menu step by step. 9. VOL+/ : Rightward selection/For volume increasing. 10. VOL-/ : Leftward selection/For volume decreasing.
V Remote Controller Operation Instruction 1 13 2 14 15 16 17 18 19 20 21 22 1. LR03 "AAA" SIZE 4 5 6 7 8 9 10 11 12 LR03 "AAA" SIZE 3 (Power Switching Key): When you press this key, the TV set will be turned off, and press again it will be turned on. 2. Channel Key(Number key (0-9) and ): Press relevant key directly when you want to change channel. 3. VOL+/VOL- (Volume control key, left and right direction key): Press VOL+ to turn up the volume.
9. LIST: TV program menu key. When pressing this key, you will see the entire program list in a program list box. 10. FAVOR: Press to activate/deactivate my favorite Program list. 11. SOURCE: When pressing this key, you switch state among TV, AV and External storage. 12. EPG: When you press this key, the system will show the program guide menu(ATSC mode). 13. (Mute Key): When you press this key, the sound will disappear, and press again the sound will return to normal. 14.
VI Basic Operation 1. Connection of Power Supply: Align the power supply plug on AC adapter with the jack on the machine rear cover marked with DC. 2. Connection of Antenna Cable: 75ohm antenna conversion line Align one end of the attached antenna cable plug in the antenna jack on TV set and the other end plug in the external antenna jack. 3.
VII TV Menu Operation 7.1. TV/AV Image Quality Adjustment Picture Mode Personal Brightness 50 Contrast 50 Color 50 Sharpness 50 Tint 0 Color Mode Normal Press MENU key to enter the menu list and then press left or right key to enter the above list. Press up and down key to choose to enter the sub-list, press left and right key to adjust the numerical value or setup the contents, then press MENU to confirm and return to previous list.
Press MENU key to enter the menu list and then press left or right key to enter the above list. Press up and down key to choose to enter the sub-list, press left and right key to adjust the numerical value or setup the contents, then press Menu to confirm and return to previous list. Press Menu again or press EXIT key on the remote controller to quit the sub menu list directly after the adjustment of sound effect. Precautions 1.
7.4. Settings Menu Language English Zoom Mode Panorama Transparency 0% OSD Time Out 45 Sec. Closed Caption Restore Default Press MENU key to enter the menu list and then press left or right key to enter the above list. Press up and down key to choose to enter the sub-list, press left and right key to setup the contents. 7.4.1. OSD Language Settings Press Up and Down Key to choose Menu Lauguage, and press Left and Right Key to choose among English, Frencais and Espariol. 7.4.2.
There are three CC Modes, which are Off (closed caption off), On (closed caption always on when information is available) and CC on Mute (closed caption on when TV is in mute and closed caption off when TV is not in mute). Basic Selection can choose among CC1, CC2, CC3, CC4, Text1, Text2, Text3, Text4. Advanced Selection can choose among OFF, Servicel 1, Servicel 2, Servicel 3, Servicel 4, Servicel 5, Servicel 6. 7.5. Program search TV Source CATV Auto Scan Favorite Show/Hide Channel No.
VIII Operations in CARD mode 1. Memory (USB and CARD) operation This product supports a variety of USB memories, as well as four types of cards, like Multi SD, MMC, MS and MS PRO. The capacity of the USB memory and cards is required to be below 4GB. The USB memory and cards can play multimedia files in MP3/JPEG and AVI like playing disks. 2. Playing multimedia files Press the SOURCE button to switch to the "External Storage" mode.
2.1. When in PHOTO status, press OK and then VOL- /VOL+ to select the corresponding function of the icon in tool bar: : Previous photo : Pause (It is Play button when in pause status) : Next photo : Zoom in : Repeat : 6-image display 2.2.
IX Before Repair The following phenomenons do not mean that the TV set has fault. Please check it according to the following methods before repair. Phenomenon No image and sound No signal Reason AC adapter or automobile adapter connecting improperly; using unauthorized power; the power switch is on the state of off. Whether chosen the right channel; auto setup receiving channel again; channels need to be reset in a new place.
X Technical Parameter Input ATSC frequency: 54MHz 803MHz NTSC receiving frequency: 55.25MHz 801.25MHz LCD Screen Technical Parameter LCD screen: 9" LCD Resolution: 640 H RGB 234 V LCD screen scale: 16:9 Capability Parameter Power Supply: By AC Adaptor AC INPUT 100-240V 50/60HZ DC OUTPUT 12V/2000mA Build-in battery: 7.
XI Stand Assemble Instruction Manual Pict.-1 Pict.-2 Pict.-3 Step One: Pick up the stand from the package as Pict.-1. Step Two: Pick out the 2 screws from the Stand Head and use later Pict.-2. Step Three: use the 2 screws from the step two to put into the hole of the fixed stand, later it can be used to lock the stand head Pict.-3. Pict.-4 Pict.-5 Pict.-6 Pict.-7 Pict.-8 Pict.-9 Pict.-10 Pict.-11 Pict.-12 Step Four: Lock the fixed stand and Stand Head together as Pict.-4.
Warning This operation instruction is only intended for reference. No further notice is available to any modification of all information contained therein. Due to continuing improvements, the features and design are subject to change without notice. Warning No repairable components exist in the machine. Don't try to dismantle and improve the TV box, and the high voltage in the machine may cause danger. Maintenance and adjustment of the TV box is subject to professionals.
