Manual

.... I IML
7"0 CHECK 7"HE BEGIN/END "' ,
l)Press the POWER button so that the REC indicator
goes off.
2)Press the MENU button on the remote control.
i
"TIMER PROGRAMMING" is pointed. I3)Confirm
4)Press the F.FWD/I_ button. The details of pro- I
grams appear on the TV screen.
5)Press the MENU button on the remote control to l
return to TV mode.
• Make sure the channel you want to record is prop-
erly set in advance.
• It is not necessary to press the RECORD button for
timer recording.
• Recording begins automatically at the Start time.
• If you are recording using a Timer mode, you may
not operate the unit manually.
• The erase-prevention tab on the cassette must be in
place (or you must put tape over the hole).
• If the erase-prevention tab is removed, the cassette
will be ejected when the POWER button is pressed
to off.
• If the tape runs out before the end time, the
TV/VCR will switch to the Stop mode immediate-
ly, and the tape will be ejected.
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1 Select "USER'S SET UP"
Press the MENU button on the -_"_-
TIMER P_OGRAMMING
remote control. SEtTI'_GpICTURECLocKCONTRO_
CHANN£L SET UP
Press the PLAY/A or STOP/Y but- " w.,,u'E"s'_'"P_,o
t_,UAGE I_IGLrSH]
ton to point to "USER'S SET UP". o_,_,o_,_,_,,,o_j
TI_E SEARCH
Then, press the EFWD/I_- button.
2 Set "'AUTO RETURN" to [ON]
Press the PLAY/=. or STOP/V but- [_ .,_,_s_,P-
ton to point to "AUTO RETURN".
RENTAL [OFF]
Press the EFWD/I_ or REW/al ,_o"_"_""_"_,,_.,jq,!_'_;•
button until [ON] appears.
3 Auto Return will begin
When all the timer recordings are completed, the
TV/VCR will rewind to the beginning of the recorded
program(s).
NOTE:
• If you press the POWER button while tape is
rewinding; the Auto Return will stop.
4 Watch the recorded program
Press the PLAY button.
TO (-INCEL TIll £ A I/7"0 RETURN
MODE
Repeat steps [1] and [2], select IOFF] using the
EFWD/I_" or REW/_I button.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
The Wake Up Timer function turns on the TV/VCR
without using the POWER button after a desired
period of time.
NOTES:
• Use the remote control for this procedure.
• Clock must be set to the correct time before setting
the timer.
• If you want to select [TAPE], you must insert a
cassette tape in the TV/VCR. The tape will start
playback automatically on your desired time.
1 Select "WAKE UP TIMER"
Press the WAKE UP/SLEEP button
on the remote control once, and
confirm "ON/OFF" is pointed.
Press the EFWD/II_ or REW/_I
button until [ON] appears.
I 01
WAKE Op I_ ONIOFF t_Ni_
IMER rV;IAPE
l._ /,_,_3
2 Select "TV" or "TAPE"
ton until to point to "TV/TAPE'.
Press the F.FWD/I_" or REW/<I
button, and select [TV] or [TAPE] ............ _,_
IMER _ IV_APE l_j
- 28 - EN
9103