Manual

TIMER
You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is being set to record:
DATE: July 6th, 2000
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
• Ifa cable box or satellite box is connected with the
TV/VCR you will be limited to record only one
channel. And the channel selector on the TV/VCR
must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be
recorded must be selected on the boxes•
• Clock must be set to the correct time and date
before setting the timer.
• TV/VCR power must be turn on to program it.
• Insert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin
recording.)
• The channel you want to record is properly set in
advance. (See page 13.)
Avoid over lap of programs ...
There is a chance that a program will not be record-
ed. when programs overlap;
• The program with an earlier start has priority.
• Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
• The illustration below demonstrates the sequence
of recordings.
Program 1 10:00AM - II:00AM
Program 2 9:00AM - 10:00AM
Program 3 9:30AM - 12:00PM
Recordt_ _equsnce
Prog_lrn 1 f
IO:G_AM-11:00AM
program2
9:30AM.1I:00pM fl
9:00AM 10:OOAM II:00AM 12:00pM
*O_otdtng petlod ls SHADEO
1 Select "TIMER PROGRAMMING"
Press the MENU button on the remote control•
Confirm "TIMER PROGRAMMING" is pointed by
pressing the PLAY/A button•
- 26 -
And press the F.FWD/II,- button• / -.E,o-
I_ TrMER pRI_EJ_MMING
• If you have not yet set the clock, t sEr,,,GP'c_"_c_"°_o_ee_
CHAN'_EL S_ UP
"MANUAL CLOCK SET" [ _sE_s_.,,_,_,
L,_/GklA_E F_GUSHJ
appears. If so, follow stops [3] to | _,o,_o,,E°_J
[81 on page 15. Then set the timer L. ..........
recording,
2 Select your desired program position (1-8)
Press the PLAY/& or STOP/v but- -_,._...oo....,.o )
ton to select the desired program _"_'_i," _"i _
l
position. •.....
in,. , . .
Then,presstheFFwr, bntton[i ::ii ::::i
i 1...............
' Press the PLAY/A or STOP/!? but- _ _ _'
ton until the desired channel num- .: 7, " :: "
ber appears, "_'__':::_) : :: ))
(Example: CH61 ) ......... "
Then, press the F.FWD/I_ button•
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be recorded is selected on
the cable box or satellite box.
4 Select once, every day or weekly recording
For once recording :
tl
Press the PLAY/A. (up) button _ _. _ '_ ..
until the desired date appears. ::,',: :i: ,::: ::: ::
(Example: "7/06" for July 6th). " ............
Then, press the F.FWD/I_ but- :: :',::::: ::: ::: ::
ton.
For every day recording : To record a TV program at
the same time on the same channel every day.
(Example: Monday through Sunday)
Press the STOP/Ir (down) button _ _"_"_'_
until "EVRY DAY" appears. _ ::,_:: ::: ::: ::: ::
Then, press the F.FWD/_ but- 1,1;_:,_::: :: ::
ton 'j " i_
For weekly recording : To record a TV program at
the same time on the same channel every week.
(Example. • every Monday)
Press the STOP/Y (down) button ( ........ _ ....... ]
untd"EVRY' and yourdes_red | :: 2: ::: ::: ::: ::]
day of the week appear together. I,._'g,, _:: ::: ::|
Then,
the F.FWD/I_
but-
! t
press J :: :',::::: ::: ' ::/
ton. "k ' " ";
EN
9103