Manual

Make sure ,..
• TV/VCR power must be turned on.
• Insert a tape.
SEARCH
This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape,
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning
point at which you want to review.
2 Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3 Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4 To activate "ZERO RETURN" mode
Press the MENU button on the (- ME,O
remote control. [ ,,_E_,_,,MM,,O
_'ICTURE CONTROL
SE_ING CLOCK
Press the PLAY/A or STOP/V but- c.,,.E_r_
UBERS SET UP
V.CHIp SET UP
ton to point to "ZERO RETURN". _,,_ =_
Then, press the EFWD/_ button. _' ......... ,
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.
The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTES:
• Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time
• This function wilt not operate in recording mode.
• This function is not operative when a cassette tape
is not inserted in the TV/VCR.
In the example below." To watch a program after 2
hour 50 minutes from the present position, in either
direction.
1 Insert a tape.
2 Select "TIME SEARCH" mode
Press the TIME SEARCH button (with each push it
will increase by 10 minute)
OR
Press the MENU button on the
remote control.
Press the PLAY/A or STOP/v but-
ton to point to "TIME SEARCH".
Then, press the EFWD/_ button.
MEtch/
TIMER¢'R_RAMMtNG
¢'tCTURE CONTROL
$EVIING CLOCK
CH_,_,5_fiL SET UP
USERS SET UP
V-_HIP SET tip
LANGUAGE [ENGLISH]
CAt_TION [OFFI
ZERO nETORN
I,. TItlE SEARCH
3 Enter your desired time
Press the PLAY/A or STOP/V but- I _,,_,.,_.
ton until your desired time appears. / :_=°_
(Example: "2:50" stands for 2 hours /
50 minutes) |
If you wish to cancel the Time _,
Search at this point, press the MENU button on the
remote control.
4 Begin Time Search
By pressing the REW/'..II or EFWD/I_ button, the
TV/VCR will rewind or fast forward to the specified
point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
TO CANCEL 7"HE TIME SFARCH at this
point
Press the STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.
- 23 - EN
9103