Manual

TV OPERATION
1 Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
2 Select the channel number
Press the CHANNEL • or • button to select your
desired channel number or press the number buttons
on the remote controt.
Remember: If the TV/VCR is connected to a cable
box or satellite box, the TV/VCR must be on CH3 or
CH4, then the channel to be viewed must be selected
on the cable box or satellite box.
3 Adjust sound
Press the VOLUME A or V button
to adjust the volume.
This function enables you to decrease the TV screen
contrast and making it suitable for use with a TV
GAME.
NOTE: This function can not be set during recording.
f
Press the GAME button on the | _,,,_
remote control. "GAME" appears
on the screen.
When you press the GAME button;
• The TV/VCR comes on automatically if it is off.
• The TV/VCR will be in external input mode auto-
matically.
TO CANCEL TIlE GAME MODE
Press the GAME button or CHANNEL A or • but-
ton on the remote control.
The TV/NCR's picture controls - BRIGHT, CON-
TRAST, COLOR, TINT and SHARPNESS - are
preset to factory specifications. Although they are
usually the best, you may need to make some further
adjuslments for a natural looking image.
NOTES:
• Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.
• When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
• TV/VCR power must be turned on.
1 Select "PICTURE CONTROL"
PresstheM NUbutto onthe/.....1
remote control, ,. ,,ME__.,..,._
E(CTU RE CONTROL
SEVhNG CLOCK
Press the PLAY/A or STOP/v but- u,,.,°'"'"'_'""_,..
V CHiP SET UP
ton to point to "PICTURE CON- 0,_,,O._O'G"EOmE_'_"_
TROL". ..........
Then, press the EFWD/I_ button.
2 Select item you want to adjust
Press the PLAY/• or STOP/• but-
ton until desired control is dis-
played.
BRIGHT
BR(GHT
CONTRAST .....................
COLOR
TINT
SHARPNESS
iiii
3 Adjust the picture control
Press the EFWD/II_ or REW/-,,II button to adjust to
your desired level.
REW/_I F.FWD/I_
BRIGHT to decrease to increase
brightness brightness
CONTRAST to decrease to increase
contrast contrast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS to soft to clear
• If there is a power failure of any kind, the unit will
retain its memory for this feature.
- 17 - EN
9103