Manual

MANUAL CLOCK SETTING
Make sure ...
• TV/VCR power must be turned on.
Press the MENU button on the
remote control.
Press the PLAY/A or STOP/V but-
ton to point to "SETTING
CLOCK".
Then, press the EFWD/I_ button.
1 Select "SETTING CLOCK" !
I
.... !
TIMERPROGRAMMrNG ]
PICTURE CONTROL
p- SE_ING CLC_K
¢HANt4EL SET UP
USER S SE_ UP 1
v CHIP _ET UP
LANGUAGE [ENGLISH]
ZER_ RETUR_I
TIME SEARCH
2 Select "MANUAL CLOCK SET"
Press the PLAY/& or STOP/V but- _'_'_
ton to point to "MANUAL CLOCK *UTOCLO_KIo"l
SET". ,u_oc_.o. E,o,o]
Then, press the EFWD/I_ button. .*.O,LOLO_KS_T
o s I" [OFF]
3 Select the month _ MANUALCL_KSET
Press the PLAY/& or STOP/V but- l _Y" _'_ _"
ton until your desired month _'_ --
appears. (Example: May --->05) .o_.......
Then, press the F.FWD,'I_ button.
ii
4 Select the day
Press the PLAY/A or STOP/v but-
ton until your desired day appears.
(Example: 1st --> 01)
Then, press the EFWD,'I_ button.
MANUAL CLOCK SET - |
HO0_ MINUTE
5 Select the year
Press the PLAY/A or STOP/_" but-
ton until your desired year appears.
(Example: 2000)
Then, press the EFWD/I_ button.
MONTH ClAy YEAR
HOUR "dINUTE
In the example below, the clock is to be set to:
DATE May I st, 2000
SETTING TIME 5:40PM
6 Select the hour _ _MA_LIAL_LO(3_T
Press the PLAY/& or STOP/_ but- l '_" °'_ '_"
ton until your desired hour appears, o_' °' _" _o00
(Example: 5, PM) .+,o, _,,_
Then, press the F.FWD/I_ button. °_" "_
7 Select the minute _" -M_NLIALCL_L;KS_T
Press the PLAY/A or STOP/_' but- ] .o.,, Cl......
ton until the desired minute appears.] °..... °" _°°°
(Example: 40) l "°_ '_'_
8 Start the clock
r
Press the MENU button on the ]
remote control. |
Although seconds are not displayed,]
they begin counting from (30when
you press the MENU button on the
remote control. Use this feature to synchronize the
clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power
failure for more than 30 seconds, you may have to
reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock,
1)Follow steps [1] and [2].
2)Select where you want to change using the
EFWD/I_ or REW/<I button.
3)Enter correct numbers using the PLAY/I_ or
STOP/_ button.
4)Press the MENU button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and press
the EFWD/I_- or REW/<I button to turn [OFF] this
function. Then you can manually adjust the clock.
- 15 - EN
9103