OPERATING INSTRUCTIONS 45 SECONDS ANTI-SHOCK PORTABLE CD PLAYER WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
OPERATING INSTRUCTIONS 45 SECONDS ANTI-SHOCK PORTABLE CD PLAYER CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This compact disc player is classified as a CLASS 1 LASER product. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT Invisible laser radiation when open and interlocks defeated. Avoid exposure to beam.
USING ON DRY CELL BATTERIES A USING ON RECHARGEABLE BATTERIES C Open the battery compartment and insert two LR6 (size AA) alkaline batteries with the and marks correctly aligned. Not included. Be sure to use size AA Ni-Cd 1.2V rechargeable batteries.which are commercially available . Not included.
BEFORE PLAYBACK D HOLD switch D Release the HOLD switch to OFF position before playback. When not using the unit, set the HOLD switch to the ON position, Accidentally pressed button will not function. If buttons are pressed when the HOLD switch is set to the ON position. "HOLD" will light on the display. Turning on and off D Turning the power on Press PLAY/PAUSE. Power is turned on and playback starts.
PLAYBACK H Connect the supplied headphone to the PHONE jack. 1. Release HOLD to OFF position. 2. Place a disc. 3. Press PLAY/PAUSE Playback starts from the first track. BASIC OPERATION To stop: Press STOP To pause: Press PLAY/PAUSE To resume, press it again. To search for the beginning of a track: Press or To locate a desired passage: Keep or Pressed. Release the button until the start of desired passage.
CONNECTION TO AN EXTERNAL UNIT I MAINTENANCE Use a commercially available connection cord which has a 3.5mm stereo plug at one end and two phono plugs at the other end. Connect the stereo plug to the LINE OUT jack of the unit and connect the phono plugs to the analog input (AUX) terminals of the external unit. NOTE Turn off the power of both units before connection. DO NOT connect to the PHONO(magnetic pickup) inputs of an amplifier. Volume and bass boost on this unit have no effect on the line output.
SPECIFICATIONS Tracking system Laser pickup D/A conversion 1-beam laser Semiconductor laser 8-times oversampling digital fillter +1- bit DAC Frequency response Outputs Input Power Dimensions Weight 20-20,000 Hz PHONES: stereo jack (3.5mm) [ 20mW+20mW, 32 ohms at 1 kHz] DC 4.5V for external power from AC adaptor: Not included. DC 3V from Alkaline batteries (2 x AA or LR6): Not included. DC 2.4V from the rechargeable batteries: Not included. 142 x 29(H) mm ( 5 9 /16x 1 1 /8 inches) 210 grams (9.8 oz.
SUBJECT TO MODIFICATION WITHOUT NOTICE!
