Cut Sheet

Installation Notes
Specifications subject to change without notice.
65
Catalog # Date Type
Project Prepared by
Comments
SPECIFICATION DATA
T5HO PSN HT
Performance Guide
Specifications
3
High Ambient Universal Voltage (120-277V)
Input Rated
1
Ballast
1
Input
1
System
Item Current Lamp
1
Lumens No. of Factor System
1
Mean
1
Power Efficacy
Number Description (AMPS) Type (lm) Lamps (BF) Lumens Lumens (Watts) (lm/W) BEF
2
QTP 2x54 T5HO Fixed Output BF 1.0
49136 QTP 2x54T5HO/UNV PSN HT 1.00/0.43 FP54T5HO 5000 2 1.00 10000 9300 121/118 83/85 0.85
(49135)* 1 1.00 5000 4650 61 82 1.64
QTP 4x54 T5HO Switchable Model
49161 QTP 4x54T5HO/UNV PSN HTW 2.00/0.85 FP54T5HO 5000 4 1.00 20000 18,600 241/236 83/85 0.42
(49160)** 3 1.00 15000 13,950 182/178 83/85 0.56
2 1.00 10000 9300 121/118 83/85 0.85
1 1.00 5000 4650 61 82 1.64
1: At 35°C lamp ambient temperature.
2: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value).
*(49135) QTP 2x54T5HO/UNV PSN HT: same as 49136, with leads.
**(49160) QTP 4x54T5HO/UNV PSN HTW: same as 49161, with leads.
Item Number 49161 QTP 4 x 54 T5HO / UNV PSN HTW
QUICKTRONIC PROFESSIONAL
Number of Lamps
High Ambient Temperature (Case)
Starting/Ballast Factor
Line Voltage (120-277V)
Primary Lamp Wattage
System Life / Warranty
QUICKTRONIC
®
products are covered
by our QUICK 60+
®
warranty, a
comprehensive lamp and ballast
system warranty. For additional
details, refer to our QUICK 60+
warranty bulletin.
Data based upon SYLVANIA
PENTRON
®
HO lamps shown.
QUICKTRONIC
®
PHO HT ballasts are
also compatible with other lamp
manufacturers equivalent lamp
types that meet ANSI specifications.
High Ambient Temp.
T5HO PROStart
®
Professional Series
OSRAM SYLVANIA
National Customer
Service and Sales Center
1-800-LIGHTBULB
(1-800-544-4828)
www.sylvania.com
Starting Method: Programmed
Rapid Start
Ballast Factor: 1.00
Circuit Type: Series
Lamp Frequency: >40 kHz
Lamp CCF: Less than 1.6
Starting Temp: -20°F (-29°C) min.
4
Input Frequency: 50/60 Hz
Low THD: <10%
Power Factor: >98%
Voltage Range: ±10% of 120-277V
rated line (108-305V)
UL Listed Class P, Type 1, Outdoor,
UL Type CC Rated
CSA Certified
High Ambient Applications:
90°C Max. Case Temp. (3 yr. warranty)
Standard Ambient Applications:
70°C Max. Case Temp. (5 yr. warranty)
FCC 47CFR Part 18 Non-Consumer
Class A Sound Rating
ANSI C62.41 Cat. A Transient Protection
Dynamic End-of-Lamp-Life Sensing
Remote Mounting (Max. wire length
from ballast case to lampholder):
up to 18 feet
4
3 Data based on PENTRON HO lamp types
for primary ballast application.
4 Operation below 50°F (10°C) may affect
light output or lamp operation – see “Low
Temp. Starting” definition. Remote red and
brown leads up to 18 feet. Keep blue and
yellow (for 4-lamp model only) leads <10 ft.
Switching: Simultaneously disconnect all ungrounded line conductors.
Install in accordance with National & Local Electric Code. Ground ballast case.
Dimensions:
Model QTP2x54 T5HO/UNV PSN HT enclosure size:
Overall: 16.73"L x 1.18"W x 1.0"H (425mm L x 30mm W x 25.4mm H)
Mounting: 16.34" (415mm)
Wiring:
Push-in connectors
Use 18AWG solid copper wire only
See page 66 for wiring diagram.
Packaging:
Quantity: 20 (2-lamp)
Weight: 2L: 0.88 lbs each (approx)
Dimensions:
Model QTP4x54 T5HO/UNV PSN HT W enclosure size:
Overall: 16.73"L x 2.32"W x 1.0"H (425mm L x 59mm W x 25.4mm H)
Mounting: 16.34" (415mm)
Wiring:
Push-in connectors
Use 18AWG solid copper wire only
See page 67 for wiring diagram.
Packaging:
Quantity: 2-Lamp: 20 (no leads)
10 (with leads)
4-Lamp: 10 (leaded and non-leaded)
Weight: 2L: 0.88 lbs, 0.40kg each (approx)
4L: 1.68 lbs, 0.76kg each (approx)
25.4 mm
1.0”
Height
414.0 mm
16.3”
Mounting Length
425.0 mm
16.73”
Length
59.0 mm
2.32”
Width
414.0 mm
16.3”
Mounting Length
425.0 mm
16.73”
Length
25.4 mm
1.0”
Height
30.0 mm
1.18”
Width