Cut Sheet

T5HO PSN HT
64
Lamp / Ballast Guide
Key System Features
System Information
• 90°C maximum case temp.
• Universal voltage (120-277V)
• Low-profile (1.00" High)
• 100% Ballast factor
• QUICKSENSE ballast technology
(end-of-lamp-life sensing)
• PROStart programmed rapid start
• UL type CC rated
• -20°F (-29C) Min. Starting Temp.
• Operates at >40 kHz to reduce
potential interference with infrared
control systems
• High power factor
• Low harmonic distortion
• Lightweight
• UL, CSA, FCC
SYLVANIA QUICKTRONIC PHO HT
is ideally suited for:
• Industrial high-bay
• Commercial
• Retail
• Hospitality
• Institutional
• New construction
• Direct lighting
• Indirect lighting
• Surface mount
• Cove lighting
Application Information
54W T5 - PENTRON
®
HO
1 or 2 lamp
QTP2x54T5HO/UNV PSN HT
QTP4x54T5HO/UNV PSN HT W
3 or 4 lamp
QTP4x54T5HO/UNV PSN HT W
Also operates:
FT50DL, FT55DL, FPC55, L58
Four lamp switchable model can be
wired for four, three, two or one lamp
operation.
Two lamp fixed output model can be
wired for one lamp operation.
SYLVANIA QUICKTRONIC HIGH
AMBIENT (HT) PHO operates
PENTRON HO, PENTRON HO Circline,
and DULUX
®
L T5 lamps with full
lumen output and optimal system
performance.
SYSTEM PHO High Ambient
Temperature ballasts are specifically
designed for applications where the
ballast is subjected to higher ambient
temperatures, as in high bay indus-
trial installations. The four lamp UNV
(120-277V) ballast system provides
18,600 mean lumens, which, when
factoring in lumen maintenance and
typical T5HO fixture efficiency, can be
considered as a direct replacement
for standard 400W MH. As such, the
family is ideally suited to replace
250W and 400W metal halide installa-
tions.
Unique to the family is the 120-277V
4-lamp “switching” ballast, designed to
switch from 4- to 2-, 3- to 2-, 3- to 1- or
2- to 1-lamps. The switching feature can
be accessed through a second input power
terminal. This feature allows for a range of
control interfaces, including an occupancy
sensor, mounted inside a fixture.
SYSTEM PHO HT ballasts contain QUICK-
SENSE
®
ballast technology, a patented
circuitry designed to shut down the
system reliably and safely when lamps
reach end-of-life.
Setting the standard for quality, SYSTEM
PHO HT is also covered by our QUICK 60+
®
warranty, the first and most compre-
hensive system warranty in the industry.
SYSTEM PHO HT is available in four and
two lamp models to cover a wide range
of applications.
System PHO HT operates on 120V
through 277V, 50 or 60Hz current, elimi-
nating “wrong voltage” wiring errors and
reducing the number of ballast models in
inventory by half.
PROStart ballasts provide optimum starting
conditions and provide up to 100,000
switching cycles for use on occupancy
sensors and building control systems.
QUICKSENSE ballast technology helps to
protect against overheated bases and
sockets, as well as cracking of the lamp
glass wall, and uses dynamic end-of-
lamp-life sensing to avoid false
shutdowns caused by some static
sensing methods. QUICKSENSE ballast
technology will auto reset when spent
lamps are replaced with new ones.
Input Initial System
Power System Efficacy
System Type (W) Lumens LPW
F40T12 - E.S. Magnetic Ballast (4-lamp) 172 11590 67
F34T12 - E.S. Magnetic Ballast (4-lamp) 144 9500 66
FO32T8/XP - QT4x32IS (4-lamp) 114 10800 95
FP54T5HO - QTP2x54T5HO/UNV PSN HT (2-lamp) 121 10000 83
FP54T5HO - QTP4x54T5HO/UNV PSN HTW (4-lamp) 241 20000 83
QUICKTRONIC
®
PROStart
®
T5HO
Universal High Ambient Temp.
www.sylvania.com
<10% THD Electronic T5HO Fluorescent
Programmed Rapid Start Ballasts
Normal Ballast Factor
HT
Professional Series
The four lamp unit can be wired for four,
three, two or one lamp operation. The
two lamp unit can be wired for one lamp
operation, allowing for an additional 50%
reduction in inventory model numbers.
SYSTEM PHO HT has a 25.4H (mm)
profile. PENTRON T5 lamps are designed
to provide peak performance at 35°C
fixture ambient, allowing for smaller and
more innovative fixtures.