SYLVANIA TURNTABLE PLAYER WITH USB/SD/BLUETOOTH MODEL: STT104BT-BLACK_ING READ INSTRUCTIONS CAREFULLY BEFORE USE AND STORE IN A SAFE PLACE FOR FUTURE REFERENCE SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.
IMPORTANT INSTRUCTIONS CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To assure continued operation, follow the attached installation instructions and use only shielded cables when connecting to other devices.
WARNING! • The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the apparatus. • The use of apparatus in moderate climates. • The apparatus should not be exposed to dripping or splashing. • Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation. • Do not place objects filled with liquids, such as vases, on the apparatus.
PRODUCT OVERVIEW REC. USB REC STOP SD CARD MODE LIGHT 45 RPM Adapter CHARGE POWER Lift Lever Speed Lever Tone Arm Rest AUX IN Tone Arm PHONE ON OFF VOL Cartridge Spindle SD CARD SD CARD Slot REC STOP MODE LIGHT Platter MODE Lamp Previous Button Play/Stop &REC STOP Button USB CHARGE Lamp REC. Previous Button USB Slot Source/REC.
DC IN 5V 1.
GENERAL OPERATIONS Turn on/off the unit 1. Plug the small end of the power plug into your turntable, the big one to the wall outlet. DC IN 5V 1.0A L R To DC in 5V jack Note: The supplied AC adaptor is suitable for use on AC main supplies of 100-240V AC and should only be connected to a mains supply within these parameters. 2. Rotate the POWER switch clockwise until a “click” is heard; then the POWER lamp will turn red, which means the unit is powered on. 3.
Using an external amplifier 1. Insert one end of the RCA cable to the AUX IN port on an external amplifier or other devices, the other into the LINE OUT ports on the unit. (cable not supplied) DC IN 5V 1.0A L R 2. Start playback in anyway supported by the unit 3. Switch the POWER/VOL knob to a rather lowe level, and then increase the volume to your preferred level.
STEP-BY-STEP OPERATIONS Listen to the PHONO 1. Remove the stylus cover from the stylus and release the Tone arm form the Tone arm rest. 2. Place a record on the turntable platter and select the specified speed (33 1/3, 45 or 78) according to the record. NOTE: If you are playing 45RPM singles, place the 45 RPM adapter on the center spindle (45RPM adaptor is located in the holder near the tone arm). 3.
Bluetooth operation 1. Press the POWER/SOURE to switch between USB/SD and BT. The green MODE lamp will blink very slowly when switching to the Bluetooth mode. 2. Activate the Bluetooth function on your external Bluetooth device (cell phone or other music device). 3. select the pairing name "SYLVANIA STT104BT" from the devices list on your external device and tap it. If the passcode is required on some device, enter the password ‘0000’. 4.
OTHER INFORMATION Replacing the Stylus Cartridge Refer to figures 1-8 To fit a new cartridge, repeat process 3 & 4 in reverse order. Note: Please exercise extreme care while performing this operation so as to avoid damaging the tone arm and audio line wires. The Turntable’s cartridge needs to be replaced every 3 - 4 months after continuous playing. Replacement Ceramic type Cartridges are widely available from the internet. Tips for better turntable performance 1.
TROUBLESHOOTING PROBLEM No power No sound POSSIBLE CAUSE POSSIBLE SOLUTION AC/DC Adapter not Check the power connection and make sure it is in good condition. connected properly The power in the builtin battery used up and the unit not connected to the wall outlet Volume in minimum position Connect the unit to the wall outlet to charge the battery. Raise volume level by switching the POWER/VOL knob (and raise the volume of connected/paired external device). Start playback on the external device.
TECHNICAL SPECIFICATIONS Power input AC 100 - 240V, 50/60Hz Power output 5V Dimensions 350 x 255 x 27 mm Speaker power 1.8W × 2 Speaker dimensions 71 x 41 x 28.7 mm Battery 1200mAh Cartridge Ceramic stereo Speed 33 1/3, 45, 78 RPM Sound input Turntable, Bluetooth, USB/SD card, AUX IN sound output Speakers, Earphones, RCA output Net Weight 2.4KGS Gross Weight 2.
To make a warranty claim, please email support@curtiscs.com or call 1-800-968-9853. 90 day Year Warranty This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are responsible for all costs associated with returning the product to us.
