SETTING TV 6626LDG A 6626LDG PREPARATION OWNER’S MANUAL INTRODUCTION 26” High Definition LCD TV built-in DVD Player OPERATING TV OPERATING DVD SETTING DVD HIGH-DEFINITION TELEVISION Movies , ngs, MP3 s, J PEGs INFORMATION TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. ESPAÑOL IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com L4360UA.
INTRODUCTION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the owner’s manual.
INTRODUCTION LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.
INTRODUCTION 5 CONTENTS INTRODUCTION CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CONNECTING OTHER DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TV FUNCTIONS INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 AUTOSCAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION 5 FEATURES TV • DTV/TV/CATV - You can use your remote control to select channels which are broadcast in conventional analog, standard definition, and high definition formats. Also, cable subscribers can access their cable TV channels. • Program Information Display (DTV only) - You can display the title, contents and other information of the current DTV program on the screen.
1. 1 2. 3. 3 30 29 4. 5. 28 7 27 9. 7. 8. 8 10 25 11 12 11 12. 24 13. 23 22 21 14. 20 19 18 13 14 15 16 17 11. 15. 17. 18. • With buttons [VOL. X/Y] or [MUTE], you can only adjust the volume of the main unit. You cannot adjust the volume of the external devices with these buttons. • Unless stated, all operations described are based on remote control use. 5 INSTALLING THE BATTERIES TROUBLESHOOTING NOTE: SETTING DVD 16. OPERATING DVD 26 OPERATING TV 10. 9 SETTING TV 6.
INTRODUCTION 5 CONTROL PANEL 1 2 3 4 5 DVD CONTROL STOP PLAY SETUP SKIP VOLUME EJECT INPUT SELECT/ ENTER CHANNEL POWER TV CONTROL 6 7 8 9 10 STANDBY 1. SETUP button (p21) To display on-screen menu. 2. STOP C button (p30) To stop disc playback. 3. PLAY B button (p30) To begin disc playback. 4. SKIP H / G buttons (p34) To skip chapters, titles (DVD) or tracks (CD, MP3 or JPEG). 5. EJECT A button (p30) To eject the disc. 6. POWER button (p13) To turn TV/DVD on or off. 7.
INTRODUCTION PREPARATION 5 CONNECTION This section describes how to connect your TV to an antenna, cable box, etc. PREPARATION MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive a digital signal. NOTE: • Be sure your antenna or other source is connected properly before plugging in the power cord. VHF / UHF antenna SETTING TV [ANTENNA CABLE CONNECTION] 1) When connecting your TV to an antenna Connect the coaxial cable on your home outlet to the ANT.
PREPARATION 5 CONNECTING OTHER DEVICES [HDMI] 1) High Definition Multimedia Interface (HDMI) uses the latest technology to ensure the signal maintains the highest degree of integrity from source to TV. Both video and audio travel through a single cable. HDMI cable To HDMI IN jack (not included) EX. HDMI OUT ANT.
INTRODUCTION PREPARATION [COMPONENT CABLE CONNECTION] Offers better picture quality for video devices connected to your TV. Use a component video cable (not included) to connect your TV to external video devices equipped with component video jacks. If you connect to your TV’s COMPONENT1 input jack, connect audio cables to the AUDIO L/R jacks of COMPONENT1. If you connect to your TV’s COMPONENT2 input jack, connect audio cables to the AUDIO L/R jacks of COMPONENT2.
PREPARATION [VIDEO CONNECTION] Offers standard picture quality for video devices connected to your TV. When the audio jack of the video device is monaural, connect the audio cable to the audio L input jack. If you connect to your TV’s VIDEO1 input jack, connect audio cables to the AUDIO L/R jacks of VIDEO1. If you connect to your TV’s VIDEO2 input jack, connect audio cables to the AUDIO L/R jacks of VIDEO2. Video cable To VIDEO1 input jack (not included) EX.
INTRODUCTION SETTING TV TV FUNCTIONS 5 INITIAL SETTINGS NOTE: 1 After making all the necessary connections, turn on your TV. • The initial Autoscan function can be executed for either “Air” or “Cable” only once. When you change the connection (Air/ Cable), set the “Autoscan” again. (Refer to page 14.) • If you connect to the cable system directly, contact the CATV installer. • When the scanning is not complete, Helpful Hint will be displayed every time you turn on the power.
SETTING TV 5 AUTOSCAN With AUTOSCAN, your TV automatically scans and memorizes your area’s viewable channels. Activate AUTOSCAN when you turn on your TV for the first time, change broadcast sources (e.g. from antenna to CATV), or move your TV to a different broadcast area. 1 Press [SETUP] to display the setup screen. EXIT PICTURE CHANNEL DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY • When the scanning and memorizing are completed, the lowest memorized channel in the broadcasting will be displayed.
This function lets you manually add channels not memorized due to poor broadcast strength during AUTOSCAN. 1 Press [SETUP] to display the setup screen. 1 Press [SETUP] to display the setup screen. EXIT EXIT PICTURE PICTURE CHANNEL CHANNEL DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY PREPARATION 5 MANUAL REGISTER This function lets you remove undesired channels from the Channel Registration List.
SETTING TV 5 ANTENNA CONFIRMATION 5 LANGUAGE SELECTION Displays signal strength for each channel. You can choose English, Spanish, or French as your on-screen menu language. 1 Press [SETUP] to display the setup screen. 1 Press [SETUP] to display the setup screen. EXIT EXIT PICTURE PICTURE CHANNEL CHANNEL DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY LANGUAGE DVD LANGUAGE DVD 2 Use [K /L] to select “CHANNEL”, then press [ENTER].
5 CHANNEL SELECTION 5 VOLUME ADJUSTMENT Select channels by pressing [CH K/L] found on remote control or [CHANNEL K/L] on the TV’s control panel, or by pressing [the Number buttons] found on the remote control. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. PREPARATION [CH K /L] Use [CH K /L] to change the channel. [VOL. X/Y] Use [VOL. X/Y] to adjust the audio volume.
OPERATING TV 5 SELECTING AUDIO CHANNELS This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV DTV 1 Press [AUDIO] to display the currently selected audio mode. 1 Press [AUDIO] to display the currently selected language and the number of available languages. 6-1 6 English 1/3 SAP / STEREO 2 Press [AUDIO] to cycle through available audio channels. • When the broadcasting has all audio...
5 SCREEN INFORMATION Use your remote control to access DVD recorders, home audio systems and other external devices when they are connected to your television. You can display the currently selected channel or other information such as the audio mode on the screen. Use your remote control to select external component. • When you press [INPUT SELECT] or [CH L] on the remote control, the Input Mode will be switched as below. Press [INFO].
OPERATING TV 5 CHANGING THE SCREEN DISPLAY MODE Each of four display modes can be selected in either 4:3 or 16:9 aspect ratios. 1 Press [SCREEN MODE] to switch the TV aspect ratio. 2 Press [SCREEN MODE] repeatedly to return to the normal screen displays. NOTE: • Some programs may not offer all display mode options.
This section describes the overview of the setup screen displayed when you press [SETUP]. For more details, see the reference page for each item. The setup screen consists of the function setting items below. 1 Press [SLEEP] on the remote control to set the Sleep Press [SETUP]. Timer. Sleep Off SETTING TV • The setting display for Sleep Timer is shown on the screen. EXIT To exit settings.
OPERATING TV 5 PICTURE ADJUSTMENT Color Use [s / B] to adjust Color to be brilliant or pale. s: To pale B: To brilliant You can select from four default picture color settings. You can also adjust brightness, contrast, color, tint, sharpness and color temperature as well as energy saving settings. Color or 1 Press [SETUP] to display the setup screen. Tint 36 Adjust Move ENTER Enter Use [s/ B] to adjust Tint to be obtained natural skin tones.
INTRODUCTION 5 CLOSED CAPTION You can view closed captioning (cc) for TV programs, movies, news, and prerecorded tapes. Closed captions refer to text of dialogue or descriptions displayed on-screen for the hearing impaired. 5 Use [K /L] to select the desired closed caption mode, then press [ENTER]. 1 Press [SETUP] to display the setup screen.
OPERATING TV 5 DTV CLOSED CAPTION 5 CLOSED CAPTION STYLE DTV DTV Apart from closed captions, DTV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. DTV can also change the style of its Closed Caption such as font, color or size, etc. 1 Press [SETUP] to display the setup screen. 1 Press [SETUP] to display the setup screen.
EXIT PICTURE CHANNEL DETAIL User Setting On Font Style Off Font Size EXIT Font Color LANGUAGE DVD PICTURE or CHANNEL Back Opacity Edge Color DETAIL Edge Type ABCDE FGH IJ KLMNO PQRST UVWXY LANGUAGE DVD each item you want to set, then press [ENTER]. • When “User Setting” is set to “On”, you can set the following items. CC style set by “User Setting” will be displayed. • The setting description for each item is shown below.
OPERATING TV 5 VCHIP A. MPAA Rating You can block certain programming inappropriate for children. This block can be released by entering a password. 5 Use [K /L] to select “MPAA Rating”, then press [ENTER]. 1 EXIT PICTURE or CHANNEL EXIT TV Rating New Password DETAIL PICTURE ABCDE FGH IJ KLMNO PQRST UVWXY CHANNEL LANGUAGE DVD DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY V-Chip MPAA Rating Press [SETUP] to display the setup screen. LANGUAGE DVD • The current setting is displayed.
V-Chip EXIT MPAA Rating or PICTURE CHANNEL TV Rating New Password NOTE: DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY • The current setting is displayed. SETTING TV • When you select a rating and set it to “Block”, the higher ratings will be blocked automatically. The lower ratings will be available for viewing. • When you set “TV-MA“ to “View”, all ratings turn to “View” automatically.
OPERATING TV C. New Password 5 HDMI AUDIO Set the method of sound input for HDMI jack. 5 Use [K /L] to select “New Password”, then press [ENTER]. EXIT V-Chip 1 Press [SETUP] to display the setup screen. EXIT MPAA Rating PICTURE or CHANNEL PICTURE TV Rating New Password CHANNEL DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY DETAIL LANGUAGE ABCDE FGH IJ KLMNO PQRST UVWXY DVD LANGUAGE DVD 2 Use [K /L] to select “DETAIL”, then press [ENTER].
INTRODUCTION OPERATING DVD DVD FUNCTIONS 5 PLAYABLE MEDIA Mark (logo) DVD-Video *1, 2, 3, 4, 6, 10 Region code 1 Recorded signals Media size Digital video (MPEG2) 12 cm Disc types or ALL - Audio CD * 4, 6, 10 - Digital audio - Digital audio or MP3 or JPEG 5JUMF 5JUMF $IBQUFS $IBQU FS $IBQU $IBQUFS FS $IBQU $IBQUFS FS $IBQU $IBQUFS FS $IBQU $IBQUFS FS $IBQU $IBQUFS FS Audio CD Example Track 1 Track 2 Track 3 Track 4 Track 5 5SBDL 5SBDL Track 6 12 c
OPERATING DVD These operations are accessible by remote control. Some may also be accessible by controls on the main unit. 5 PLAYBACK DVD CD 5 DVD MENU ( JPEG MP3 on page 32) Before: Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct channel. DVD Some DVDs contain menus which allow you to customize DVD playback.
DVD CD E1 The zoom function allows you to enlarge the video image and to pan through the enlarged image. 1 During playback, press [ZOOM]. NOTE: 5 SLOW FORWARD / SLOW REVERSE SETTING TV • Set “STILL MODE” to “FIELD” in the “OTHERS“ setting if pictures in the fast playback mode are blurred. (Refer to page 43.) • Fast forward or reverse search speed is varies with disc. Approximate speed is 1(2X), 2(8X), 3(20X), 4(50X) and 5(100X) on DVDs and 1(2X), 2(8X) and 3(30X) on Audio CDs and MP3.
OPERATING DVD 5 MP3, JPEG PLAYBACK MP3 This unit recommends the files recorded under the following circumstances: JPEG Applicable MP3 file MP3 or JPEG is a method of compressing files. You can copy MP3 or JPEG files on CD-RW/-R discs from the Personal Computer and play the files on this unit. 1 Insert an MP3 or JPEG-format disc, playback starts automatically. • Press [PLAY B] if MP3 or JPEG-format disc is already inserted. • Press [DISC MENU] when you want to call up the FILE LIST.
MP3 5 ADJUSTMENT OF PICTURE SIZE JPEG JPEG When the overall picture cannot be displayed and the edge of the picture is cut off, you can adjust the size of the JPEG playback image on screen. 1 Press [STOP C], then press [MODE]. 1 Press [PLAY B], then press [MODE] repeatedly until “ ” appears. FOLDER LIST FOLDER NORMAL DISC NAME ENTER 2 1/ SETTING TV folder name 1 folder name 2 folder name 3 folder name 4 ALL PLAY 1 folder name 1 2 Use [ENTER] or [ s / B] to select a desired setting.
OPERATING DVD 5 SEARCH FUNCTIONS CHAPTER / TITLE Search TRACK Search DVD CD MP3 JPEG Using [SEARCH MODE] Using [SEARCH MODE] 1 Press [SEARCH MODE] once to display the Chapter 1 Press [SEARCH MODE] once to display the Track Search display. Search display. /29 /12 • Press [SEARCH MODE] twice for the Title search ( 2 Press [the Number buttons] to select a desired chapter or title within 30 seconds. ). 2 Press [the Number buttons] to select your desired track within 30 seconds.
INTRODUCTION 5 REPEAT PLAYBACK TIME Search MP3 JPEG Repeat function is available only during playback. CD 1 During playback, press [SEARCH MODE] repeatedly until the “ CD “ appears. PREPARATION DVD DVD 1 During playback, press [REPEAT] repeatedly until the desired repeat setting. TOTAL 1:29:00 time within 30 seconds. 2 Each time you press [REPEAT], repeat function changes as example below.
OPERATING DVD 5 REPEAT AB PLAYBACK DVD 5 PROGRAMMED PLAYBACK CD CD MP3 JPEG This feature allows you to assign a specific point on a disc to be called back later. You may determine the order in which tracks will play. 1 During playback, press [A-B] at your desired starting 1 In stop mode, press [MODE] once. point (A). PROGRAM CD-DA A- ENTER T T T T T T T A-B TOTAL 0:00:00 3:31 4:28 4:19 3:58 4:12 4:02 3:55 1/ 3 PLAY CLEAR 2 Press [A-B] at your desired ending point (B).
INTRODUCTION 5 ONSCREEN DISPLAY CD You can check the information about the current disc by pressing [INFO] on the remote control. Angle icon, appears only when available on the DVD. 1 4/12 0:03:21 - 0:02:15 T Remaining time of the current track Elapsed time of the current track Current playback status 1 11/16 0:00:00 - 0:03:30 1/3 2 4/12 0:13:45 - 0:45:40 T ALL: Current track number / Total tracks Current repeat setting appears only when the repeat setting is active.
OPERATING DVD 5 SPECIAL SETTINGS Subtitle Language • Each time you press [AUDIO], the audio language changes as example below. ENG (English audio) ... DVD This unit allows you to select a subtitle language (if available) during DVD playback. 1 During playback, press [SUBTITLE] repeatedly until the desired language appears. 1.ENG/6 Subtitles can be varied on the displayed number. Current subtitles language. ... • Each time you press [SUBTITLE], the subtitle language changes as example below.
DVD CD INTRODUCTION Marker Setup Stereo Sound Mode CD This feature allows you to assign a specific point on a disc to be called back later. 1 Press [AUDIO] repeatedly until the desired sound To set a marker mode appears. PREPARATION This unit allows you to select a sound mode during CD playback. 1 During playback, press [SEARCH MODE] repeatedly STEREO STEREO (Right and left channels are active.) (Left channel is active.) R-ch (Right channel is active.
SETTING DVD Settings are only effective when the unit is in DVD mode and any discs should not be played back. 5 DVD LANGUAGE SETTING You can change the output language of the DVD player. 5 Use [K /L] to select the desired item, then press [ENTER]. 1 Press [SETUP] to display the setup screen. EXIT [AUDIO] *1, *2 (Default: ORIGINAL) Sets the desired audio language. PICTURE CHANNEL or DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY LANGUAGE LANGUAGE DVD 2 Use [K /L] to select “DVD”, then press [ENTER].
INTRODUCTION 5 DVD AUDIO SETTING Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. EXIT PICTURE CHANNEL [ENTER]. PREPARATION 1 Press [SETUP] to display the setup screen. 5 Use [K /L] to select the desired item, then press [DRC] (Default: ON) Sets the Dynamic Range Control. This function is available only on the discs which are recorded in the Dolby Digital format.
SETTING DVD 5 PARENTAL SETTING Parental setting prevents your children from viewing inappropriate materials. (password protected.) Playback will stop if the ratings exceed the levels you set. 1 Press [SETUP] to display the setup screen. 6 Use [K /L] to select the desired item, then press [ENTER]. or PARENTAL EXIT PICTURE ENTER CHANNEL DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY LANGUAGE DVD 2 Use [K /L] to select “DVD”, then press [ENTER]. Setup EXIT or PICTURE Press “ENTER” key to move to DVD Setup.
[STILL MODE] See note bellow. You can change the other functions. (Default: AUTO) or OTHERS EXIT PICTURE ENTER CHANNEL ANGLE ICON STILL MODE AUTO POWER OFF DUAL PLAYBACK SLIDE SHOW PREPARATION 1 Press [SETUP] to display the setup screen. INTRODUCTION 5 OTHERS ON AUTO ON OFF 5sec DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY LANGUAGE NOTE: DVD Setup EXIT or PICTURE Press “ENTER” key to move to DVD Setup. CHANNEL STILL MODE: • Select “AUTO” usually.
SETTING DVD 5 RESET TO THE DEFAULT SETTING 5 LANGUAGE CODE LIST You can reset all the settings except for the PARENTAL setting and on-screen menu language. Language 1 Press [SETUP] to display the setup screen. EXIT PICTURE CHANNEL DETAIL ABCDE FGH IJ KLMNO PQRST UVWXY LANGUAGE DVD 2 Use [K /L] to select “DVD”, then press [ENTER]. Setup EXIT or PICTURE Press “ENTER” key to move to DVD Setup.
INTRODUCTION TROUBLESHOOTING 5 TROUBLESHOOTING GUIDE If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following chart once before calling for service. • Check if the power is on. • Check the outlet connection. • Check the antenna or cable connection to the main unit. • When the outside antenna is used, check the wire condition and connection. • View other TV channels. The problem might be limited to the broadcasting station.
TROUBLESHOOTING Symptom Remedy The entered channel number changes automatically • Many digital channels have alternate channel numbers. TV changes the numbers automatically to the ones signifying the broadcasting stations. These are the numbers used for analog broadcasts. Remote control does not work • Check the antenna or cable connection to the main unit. • Check the batteries of the remote control. • Check if there is an obstacle between the sensor and the remote control. • Test the signal output.
INTRODUCTION INFORMATION 5 GLOSSARY ATSC Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as its height). HDMI (High-Definition Multimedia Interface) Interface that supports all uncompressed, digital audio/video formats including set-top box, DVD player or digital television, over a single cable.
INFORMATION 5 GENERAL SPECIFICATIONS Sound Output: TV Television System: Closed Caption: System: 5 ELECTRICAL SPECIFICATION ATSC / NTSC-M TV Standard §15.122/FCC (Digital CC) §15.
INTRODUCTION ESPAÑOL ESPAÑOL 5 FUNCIONES DEL MANDO A DISTANCIA 1. 31 2 2. 3. 3 4. 30 5. 6. 4 5 6 28 7. 8. 7 27 9. 26 10 25 11 12 11 24 23 22 21 20 19 18 13 14 15 16 17 11. 12. 13. 14. 15. 17. 18. • Con los botones [VOL. X/Y] o [MUTE], solamente puede ajustar el volumen de la unidad principal. No puede ajustar el volumen de los dispositivos externos con estos botones.
ESPAÑOL 5 PANEL DE CONTROL 1 2 3 4 5 DVD CONTROL STOP PLAY SKIP 1. 2. Botón SETUP (pág.56) Para ver el menú en pantalla. Botón STOP C (pág.58) 3. Botón PLAY B (pág.58) 4. Botones SKIP H / G 5. Botón EJECT A (pág.58) Para interrumpir la reproducción del disco. Para comenzar la reproducción del disco. EJECT Para saltar capítulos, títulos (DVD), o pistas (CD, MP3 o JPEG). SETUP VOLUME INPUT SELECT/ ENTER CHANNEL POWER TV CONTROL 6 7 8 9 10 STANDBY POWER ON Para expulsar el disco. 6.
INTRODUCTION 5 CONEXIÓN Esta sección describe cómo conectar el televisor a una antena, caja de cable, etc. PREPARATION ASEGÚRESE DE TENER UNA ANTENA. Como el DTV sólo existe en ondas aéreas, necesita una antena para recibir señal digital. NOTA: • Asegúrese de que la antena o la otra fuente esté bien conectada antes de enchufar el cable de alimentación.
ESPAÑOL 5 CONEXIÓN DE OTROS DISPOSITIVOS [HDMI] 1) El sistema HDMI (Interfaz Multimedia de Alta Definición) incorpora la tecnología más avanzada para asegurar que la señal mantiene el mayor grado de intensidad posible desde la fuente al televisor. Tanto el vídeo como el audio viajan a través de un único cable. Cable HDMI A toma de HDMI IN (no incluído) EX. HDMI OUT ANT.
INTRODUCTION PREPARATION [CONEXIÓN DE CABLE DE COMPONENTES] Ofrece una mejor calidad de imagen para dispositivos de vídeo conectados a su TV. Utilice un cable conector de vídeo componente (no incluído) para conectar su TV a dispositivos externos de vídeo equipados con tomas de vídeo componentes. Si conecta las tomas de salida componente a la toma de entrada COMPONENT1, conecte un cable de audio a las tomas AUDIO L/R (izquierda/derecha) de COMPONENT1.
ESPAÑOL [CONEXIÓN DE VÍDEO] Ofrece una calidad de imagen estándar para dispositivos de vídeo conectados al televisor. Cuando la toma de audio del dispositivo de vídeo es monoaural, conecte el cable de audio a la toma deentrada de audio L. Si conecta las tomas de salida componente a la toma de entrada VIDEO1, conecte un cable de audio a las tomas AUDIO L/R (izquierda/derecha) de VIDEO1.
NOTA: 1 Una vez hechas todas las conexiones necesarias, encienda este TV. 2 Presione [POWER] para visualizar el menú de ajuste • La función de Autoscan inicial puede ejecutarse para "Aire" o para "Cable" solamente una vez. Cuando cambie la conexión (Aire/Cable), ajuste de nuevo "Autoscan". (Consulte la página 56.) • Si se conecta al sistema de cable directamente, póngase en contacto con el instalador de sistema de CATV.
ESPAÑOL 5 PREA. AUTO CA. 5 LISTA DE CANALES Con la función AUTOSCAN, el televisor escanea y memoriza automáticamente los canales visualizables en su zona. Active la función AUTOSCAN al encender el televisor por primera vez, al cambiar las fuentes de transmisión (por ej., de antena a televisión por cable), o al trasladar el televisor a una zona de transmisión diferente. Esta función le permite eliminar canales no deseados de la lista de registro de canales.
INTRODUCTION 5 SELECCIÓN DE IDIOMA Esta función le permite añadir manualmente canales no memorizados durante la operación de AUTOSCAN debido a la poca fuerza de la señal de transmisión. Puede elegir su idioma de pantalla entre los siguientes: Inglés, Español o Francés. 1 Presione [SETUP] para visualizar la pantalla de ajuste. 1 Presione [SETUP] para visualizar la pantalla de ajuste.
ESPAÑOL Estas operaciones son controlables desde el mando a distancia. Algunas de ellas también son controlables desde el panel de mando del aparato principal. 5 REPRODUCCIÓN DVD CD ( MP3 5 MENÚ DVD en página 59) JPEG Antes: DVD Encienda el amplificador y cualquier otro equipo que esté conectado a esta unidad. Asegúrese de que el receptor de audio externo (no incluido) está ajustado en el canal correcto. Algunos discos DVD contienen menús que le permiten personalizar la reproducción del DVD.
DVD CD MP3 NOTA: MP3 JPEG MP3 o JPEG son métodos de compresión de archivos. Puede copiar archivos MP3 o JPEG en discos CD-RW/-R desde su ordenador y reproducir los archivos en esta unidad. 1 Inserte un disco en formato MP3 o JPEG, la reproduc- ción empezará automáticamente. • Presione [PLAY B] si ya se ha insertado un disco en formato MP3 o JPEG. • Presione [DISC MENU] cuando quiera activar la LISTA DE ARCHIVOS. Cuando seleccione la carpeta: • Presione [ B] cuando quiera ir a la siguiente jerarquía.
LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: LABOR: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD image burn-in are excluded from this warranty. FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase.
