Specification Sheet
SYLVANIA Luminaires
UltraLED
™
RT Downlight
Dual Selectable
www.ledvanceUS.com
Application
The SYLVANIA UltraLED RT Downlight Dual Selectable
luminaires are offered in 4", 6", 8" and 10" sizes and provide
high performing light optimized for both new construction
and retrofit applications where pin-based compact
fluorescent lamps have previously been used. Installation is
done quickly and easily in most standard frames. The CCT
and lumen selectable switches on the base of the fixture
allow for customizable light color temperature and adjustable
lumen output, offering up to 36% energy savings when
compared to traditional technologies. The luminaires are
emergency battery back-up ready.
Benefits and Features
— Spinning aluminum construction
— CCT selectable light enabled through the switch located
on the base of the product (4 light colors in the same
product)
— Lumen selectable enabled through the switch located
on the base of the product (3 lumen levels in the same
product)
— ENERGY STAR
®
listed to maximize rebate opportunities
— Emergency Battery Backup Ready (field installable)
— Wet Rated
— Trim extenders available as accessories
— Up to 91 LPW
— CRI >90
— Uniform, glare free illumination
— Energy savings up to 36%
Electrical
— 120-277Vac /120-347Vac
— Power Factor >0.9
— THD <20%
— 0-10V dimmable
Rated Life
— 50,000 hours (L
70
)
Warranty
— 5-year
— NLB Trusted Warranty Program
LEDLUM117 10 -21
Item #
Type
Project
Notes
Date
Wattage Comparison
Traditional
Source
Traditional System
Wattage
LED System
Wattage
Energy
Savings
Fluorescent 8-11-14W 7-8-9W Up to 36%
Fluorescent 8-14-15W 7-9 -11W Up to 26%
Fluorescent 15-23-27W 14-18-24W Up to 22%
Fluorescent 2x17-2x19-2x23W 25-29-35W Up to 24%
Fluorescent 2x23-2x24-2x27W 32-37-4 3W Up tp 23%
Fluorescent 8-11-14W 7-9-12W Up to 14%
Fluorescent 15-23-27W 10-18-23W Up to 15%
Fluorescent 27-2x17-2x23W 20-28-34W Up to 26%
Installation
Installation performed as a stand-alone kit (without frame) is
recommended for hard ceiling. Installation of a recessed
incandescent frame is recommended for tiled ceiling
application for proper support of the retrofit kit.
Certifications and Listings
— cETLus
— RoHS
— FCC
— ENERGY STAR
— T24
C US
ETL CLASSIFIED
Operating Temperature
— -4°F to +104°F (-20°C to +40°C)








