Installation Guide

ManualsBrandsSYLVANIA ManualsWall PackSYLVANIA 61833 Luminaires UltraLED Cutoff Wall Pack

1

2

3

4

5

6

7

8

9

Table Of Contents

SURFACE CONDUIT MOUNTING:

1. Turn off the power. Take out the luminaire and loosen the screws on the cover with the aid of a

screwdriver. Disconnect the quick connect terminal and remove the front cover (Fig 1-1A-B).

Fig. 2.2B Fig. 2.2C

2. Secure fixture to the wall. (Fig 2-2B-C).

3. Remove the appropriate threaded plug (top or sides) from the housing to allow conduit entry and

attach conduit. Make electrical connections per electrical code. Connect black wire to LINE, white

wire to COMMON and Green or Green/Yellow to GROUND. Make sure any holes are sealed with

a weatherproof sealant. (Fig. 2-3A-B).