Specification

QUICKTRONIC
®
T8 Instant Start
Universal Voltage Systems
High Efficiency Series
www.osram.us/ds
Lamp Striation Control
Normal Ballast Factor
ECS402 - 5-18
QHE T8 ISN
Lamp / Ballast Guide
32W T8 – OCTRON
®
lamps
1-lamp QHE1x32T8/UNV ISN-SC
2-lamp QHE2x32T8/UNV ISN-SC
3-lamp QHE3x32T8/UNV ISN-SC
4-lamp QHE4x32T8/UNV ISN-SC
Also operates:
FBO32, FBO31, FO25, FBO24, FO17,
FBO16, FO30/SS (30W), FBO30/SS
(30W), FBO29/SS (29W), FO28/SS (28W)
& FO25/SS (25W)
FO40T8 operation:
1 lamp on 2L ballast; 2 lamps on 3L
ballast; 3 lamps on 4L ballast
QUICKTRONIC High Efficiency, (QHE)
energy-saving electronic T8 ballasts offer
several advantages:
1. Same Light, Less Power!
• Up to
6% in energy
savings compared
to standard T8 low power
electronic
ballasts without compro-mising light
output
•
Maximum energy savings
when
compared to F40T12 magnetically
ballasted systems
2. Parallel Circuitry: keeps remaining
lamps lit if one or more go out.
3. Lamp Striation Control (LSC):
T8 energy saving lamps should be
operated above 60°F, but under certain
conditions the lamps may striate. LSC
circuitry may minimize or eliminate this
condition; however there are limited
applications where LSC circuitry may
not entirely mitigate lamp striations
4. New Banded Packaging
• Distributor-friendly for easy stocking
and individual ballast sales
• Reduced waste
• Easy removable bands
• No tangled wires
These ballasts are also RoHS compliant
and feature lead-free solder and manufac-
turing process.
QUICKTRONIC High Efficiency (QHE)
systems are also covered by the QUICK 60
+
®
warranty, the first and most
comprehensive lamp & ballast system
warranty in the industry.
• High Efficiency Systems over 90%
efficient
• Lamp Striation Control (LSC)
• Over 100 LPW (lumens/watt) with
OCTRON
SUPERSAVER
®
lamps
• Lowest power T8 I.S. Systems
• Universal voltage (120-277V)
• Small Can enclosure size
• 30-50% Energy savings
• Min. Starting Temp:
• -20°F(-29°C) for T8 lamps
• 60°F (16°C) for Energy Saving T8
lamps
• 0°F (-18°C) for FO40T8 lamps
• <10% THD
• Virtually eliminates lamp flicker
• RoHS compliant
• Lead-free solder and manufacturing
process
Key System Features
SYLVANIA QUICKTRONIC
High Efficiency ballasts
are ideally suited for:
• Any applications where the lowest
power T8 systems are needed for
maximum energy savings
• Energy Retrots
• Commercial & Retail
• Hospitality & Institutional
• New Construction
Lamp Striation Control (LSC)
• General lighting applications where
energy saving T8 lamps may
striate, particularly for the F25
energy saving T8 lamps.
Application Information
System Information
Relative
Input Initial System Mean Mean
System Type Power System Efficacy System Light Energy
(2-lamp) (W) Lumens LPW Lumens Output Savings
F40T12 – E.S. Magnetic Ballast 86 5795 67 4930 Baseline Baseline
F34T12 – E.S. Magnetic Ballast 72 4660 65 3960 80% 16%
FO32/XP
®
– QHE2x32T8/UNV ISN-SC 55 5280 96 4965 101% 36%
FO28/SS
– QHE2x32T8/UNV ISN-SC 48 4800 100 4510 91% 44%
2-FO28/SUPERSAVER
QHE 2x32/T8/UNV ISN
91%
56%
44%
Energy
Savings
2-FO32/XP/ECO
QHE 2x32/T8/UNV ISN
101%
64%
36%
Energy
Savings
2-F40T12
E.S. Magnetic Ballast
100% 100%
% Relative Light Output (Mean Lumens)
% System Wattage (Power)
40%
50%
60%
70%
80%
90%
100%
SYLVANIA QUICKTRONIC High Efficiency
(QHE) System advantages:
• Operate from 120V through 277V
• Eliminates “wrong voltage” errors
• Reduces inventory by 50%
• Utilizes Instant Start operation for
• Highest System Efcacy
• Low temperature starting capability
• Very low harmonic distortion (<10%)THD
• Operate at >42 kHz to reduce potential
interference with infrared control systems