Technical Specifications

— Optimized glass optics available in
2ft, 3ft, 4ft, and 8ft lengths
— CCT: 3000K, 3500K, 4100K, 5000K
— Beam angle: 220°
— Light emitting area: 340°
— Installed directly on 120-277V
— Patented built-in safety circuit
prevents current from flowing
through the lamp when only one end
is engaged in the socket thereby
eliminating potential shock hazard
— No risk of electrical arching between
the lamp pins and the lamp holders
— For use with shunted and non-
shunted sockets therefore no socket
change is needed
— Double ended lamp is wired end-to-
end preventing non-passive failure of
a fluorescent lamp should it be
inadvertently installed in the fixture
— THD <20%, power factor >0.90
— G13 medium bi-pin base; 8ft has
single-pin base
— Long life: 50,000 hour life (L
70
)
— Non-dimmable
— 5 year limited lamp warranty
(24/7 operation)
— No warm-up time, instant-on with
full light output and stable lamp to
lamp color
— No UV emission
— Suitable for dry and damp locations
(cannot come in direct contact with
water)
— Maximize energy savings with
occupancy sensors
— Suitable for open and enclosed
fixtures
— Approved for use with tube guards
LEDlescent T8 Ballast-Free lamps are an energy saving alternative,
designed to replace traditional fluorescent T8/T12 lamps by bypassing the
existing ballast. These LED T8 lamps contain no mercury, provide instant
light and a uniform light distribution.
Engineered to operate directly on 120-277V, these lamps minimize labor
and recycling costs. These lamps can be used with occupancy and vacancy
sensors for enhanced energy savings.
When installing the LEDlescent T8 lamps, the UL rating of the existing fixture
is not voided (even when it is electrically modified) since our LEDlescent T8
lamp is UL Classified (as a luminaire conversion retrofit kit) under UL
standard 1598C. UL 1598C is the standard covering LED retrofits intended
for an existing UL rated fixture. Since the user is retrofitting with a UL1598C
classified LED kit, the installer must follow the installation instructions
included with the lamps for the modified fixture to retain its UL rating.
Application Information
Applications
— Cove lighting
— Display case
— General illumination
— Parking garage
— Tunnels
LEDlescent
™
T8 Ballast-Free Lamps
Internal Driver/Line Voltage Linear LED T8 Lamp
Product Offering
Length Color Temperature CRI
96in. 3000K, 3500K, 4100K, 5000K 82
48in. 3000K, 3500K, 4100K, 5000K 82
36in. 3000K, 3500K, 4100K, 5000K 82
24in. 3000K, 3500K, 4100K, 5000K 82
Specifications and Certifications
Key Features & Benefits
LED502R6 3-19
www.sylvania.com/LED
U
L
US
C
LISTED
®