Installation Manual

}
private boolean shouldProcessMessage(cluster) {
// 0x0B is default response indicating message got through
boolean ignoredMessage = cluster.profileId != 0x0104 ||
cluster.command == 0x0B ||
(cluster.data.size() > 0 && cluster.data.first() == 0x3e)
return !ignoredMessage
}
private Map parseReportAttributeMessage(String description) {
Map descMap = (description - "read attr - ").split(",").inject([:]) { map, param ->
def nameAndValue = param.split(":")
map += [(nameAndValue[0].trim()):nameAndValue[1].trim()]
}
log.debug "Desc Map: $descMap"
Map resultMap = [:]
if (descMap.cluster == "0406" && descMap.attrId == "0000") {
def value = descMap.value.endsWith("01") ? "active" : "inactive"
resultMap = getMotionResult(value)
}
else if (descMap.cluster == "0402" && descMap.attrId == "0000") {
def value = getTemperature(descMap.value)
resultMap = getTemperatureResult(value)
}
else if (descMap.cluster == "0001" && descMap.attrId == "0020") {
resultMap = getBatteryResult(Integer.parseInt(descMap.value, 16))
}
return resultMap
}
private Map parseCustomMessage(String description) {
Map resultMap = [:]
def value = zigbee.parseHATemperatureValue(description, "temperature: ",
getTemperatureScale())
resultMap = getTemperatureResult(value)
return resultMap
}
private Map parseIasMessage(String description) {
ZoneStatus zs = zigbee.parseZoneStatus(description)
// Some sensor models that use this DTH use alarm1 and some use alarm2 to signify motion
return (zs.isAlarm1Set() || zs.isAlarm2Set()) ? getMotionResult('active') :
getMotionResult('inactive')
}
private Map getMotionResult(value) {
log.debug 'motion'
String descriptionText = value == 'active' ? "{{ device.displayName }} detected motion" : "{{
device.displayName }} motion has stopped"
return [
name: 'motion',
value: value,
descriptionText: descriptionText,
translatable: true
]
}
def getTemperature(value) {
def celsius = Integer.parseInt(value, 16).shortValue() / 100
if(getTemperatureScale() == "C"){
return celsius