Instructions

32
b) Indoor Unit
The connection terminals of the indoor unit are located on the reverse.
Connecttheindoorunittotheoutdoorunitviaa4-wirecable.
As already described in the outdoor unit, you should keep the example colour markings when using
connectioncables("Black","Red","White","Yellow").
If you use cables in different colours, connect them according to the signal assignment ("GND", "VDD",
"Audio", "Video").
When all connections have been made properly, plug the low-voltage round plug of the enclosed mains adapter into
the corresponding opening on the rear of the indoor unit.
ush the indoor unit onto the wall holder from above.
Plug the mains adapter into a proper mains socket. The video intercom is now ready.
Black (GND)
Red (VDD)
White (Audio)
Yellow (Video)