Instructions
• Please handle the product with care. The product can be damaged if crushed,
struck or dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualied technician.
• Maintenance, adjustment and repair work may be carried out only by an expert or
a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Connection and operation
• The product‘s design complies with protection class I. Only an earthed mains
socket connected to the public power supply may be used as power supply to
the product.
• The mains socket into which the weekly timer is inserted must be easily acces-
sible.
• The weekly timer is equipped with a child safety lock. Only when the pins of the
power plug are placed in both openings of the front socket at the same time will
the child-lock mechanism release the opening.
Nevertheless, take special caution when children are around. Children cannot rec-
ognise the danger arising from the incorrect use of electrical devices. There is a
risk of a life-threatening electric shock!
• The product is only intended for use in dry indoor locations. No part of the product
should become damp or wet; never handle it if your hands are wet! Never place
the product in the immediate vicinity of a bathroom, shower, bathtub or the like.
Lethal hazard due to electric shock!
• Use the product only in a temperate climate, never in a tropical climate.
• Do not operate the device in environments where there are high levels of dust,
ammable gases, vapours or solvents. There is a danger of re and explosion!
• Never use the weekly timer in a vehicle.
• Do not connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The conden-
sation that forms might destroy the device or lead to an electric shock. Allow the
product to reach room temperature. Wait until the condensation has evaporated.
This might take several hours. Only after this should the product be plugged into
the power supply and put into use.
• Never pull out the power plug from the front socket of the weekly timer by pulling
on its cable. Always pull out the plug from the front socket by gripping the area
provided for this purpose on its sides.
• Do not overload the weekly timer. Observe the connected load in the chapter
“Technical data”.
• Always pull out the weekly timer from the mains socket before cleaning it or when
the device will not be in use for a long time.
• Never pour any liquids above or next to the product. You run the risk of causing a
re or a fatal electric shock.
However, if liquid has entered the device, immediately turn off the power supply to
the mains socket at which the weekly timer is connected (turn off the fuse/circuit
breaker/residual current operated circuit breaker of the associated circuits). Only
then can you unplug the weekly timer from the mains socket and contact a special-
ist. Do not use the product any longer.
• Do not connect in series! This can lead to an overloading of the weekly timer!
There is a risk of re!
• Do not operate while covered! At higher connected loads, the weekly timer be-
comes warm, which can lead to overheating and potentially a re if covered!
• Only voltage-free when the plug is withdrawn!
• Never touch a weekly timer that shows signs of damage, as this could cause a
fatal electric shock!
First, switch off the mains voltage to the socket to which the weekly timer is con-
nected (switch off at the corresponding circuit breaker or remove the safety fuse
or switch off at the corresponding RCD protective switch, so that all poles of the
mains socket are disconnected).
Only then can you remove the weekly timer from the mains socket. Do not use the
damaged weekly timer any longer and dispose of it in an environmentally-friendly
manner.
Operating instructions
Digital DCF weekly timer switch with light
Item no. 1528581
Intended use
The product is equipped with a power outlet which can be switched on and off via the integrated
timer. It can be operated and programmed via buttons and a LC display.
The time can be adjusted either automatically via the DCF signal or manually.
As a special feature, a blue backlight, which is used not only for better readability of the display,
but also as a night light, can be activated for the LC display.
The product is only intended for use in dry indoor locations.
The product must be connected to an earthed mains socket. See chapter “Technical data” for
information on connection and the maximum permissible power consumption of the connected
electrical loads.
For safety and approval reasons, you may not convert and/or alter the product. If you use the
product for purposes other than those described above, you may inict damage on it. Further-
more, improper use involves risks such as short-circuits, re, electric shocks, etc. Please read
the operating instructions carefully and do not discard them. If you pass the product on to a third
party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Weekly timer
• Sticker set (type plates)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in these operating
instructions which absolutely have to be observed.
The arrow symbol is used when specic tips and information on the operation are
provided.
Observe the operating instructions!
Safety instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General information
• The product is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a danger-
ous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations,
high humidity, moisture, combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- shows visible signs of damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.