Manual
If it is no longer possible to operate the product safely, take it out of operation and protect
it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation
can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions, or
– has been subjected to any serious transport-related stress.
5.5 Li-ion rechargeable battery
Never damage the battery. Damaging the casing of the battery may cause it to explode or
catch re!
Never short-circuit the contacts/connections of the battery. Do not throw the battery or the
product into re. Risk of re and explosion!
Charge the battery regularly, even if you are not using the product. The rechargeable
battery does not need to be discharged before charging.
Important:
Rechargeable battery replacement or removal should be carried out by a qualied
technician.
Make sure any rubber gaskets are properly seated when putting the parts back
together.
5.6 LED light
Attention, LED light:
Do not look directly into the LED light!
Do not look into the beam directly or with optical instruments!
5.7 Installation
Ensure there are no electrical wires or pipes that could be damaged while drilling holes on
the mounting surface and installing fasteners.
Inadvertently drilling through electric cables can cause a life-threatening electric shock!
6 Product overview
1
4
5
2
3
1 LED light
2 Hooks
3 On/off button
4 Solar module
5 Housing
7 Installation
7.1 Selecting the installation location
Position the product in a place where the solar panel (4) is exposed to full sunlight so that the
battery can charge during the day.
Note that:
The solar panel (4) should be exposed to maximum sunlight. Do not place the product in
the shade or under cover.
Avoid direct vicinity to other light sources such as garden or street lamps, as these may
prevent the product from switching on automatically when it gets dark.
The wall on which the product is installed must be stable, rm and level.
7.2 Mounting on the wall
Ensure there are no electrical wires or pipes that could be damaged while drilling
holes on the mounting surface and installing fasteners. Inadvertently drilling through
electric cables can cause a life-threatening electric shock!
1. Measure the distance between the hooks (2) and mark the drilling points on the wall
surface.
Operating instructions
Solar wall lamp
Item No. 2749678
1 Intended use
The product is an LED lamp with a light sensor. The battery is recharged by the solar panel.
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor
use. Do not submerge in water.
Using the product for purposes other than those described above may damage the product.
Improper use can cause a short circuit, re or other hazards.
This product complies with statutory, national and European regulations. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the instructions carefully and store them in a safe place. Always provide these operating
instructions when giving the product to a third party.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
2 Delivery content
Product
2x xing screws
2x wall plugs
Operating instructions
3 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
4 Explanation of symbols
The following symbols appear on the product/device or in the text:
This symbol warns of hazards that can lead to injury.
This product is constructed according to protection Class III.
Read the operating instructions carefully before use.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we will assume no liability for any resulting personal injury
or damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General information
This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Handle the product carefully. Impact, shocks or a fall even from a low height can damage
the product.
5.3 Operating environment
Do not expose the product to any mechanical stress.
Protect the product from extreme temperatures, strong jolts, ammable gases, vapours,
and solvents.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the device.