Manual

3
Operating Instructions
Outdoor Garden Power Outlet, IP44
Item no: 2595505
1 Intended use
The product is a 4-way power outlet with protective cover.
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor use. Do not
submerge in water.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
4x screws
■
4x dowels
■
Operating instructions
3 Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Fol-
low the instructions on the website.
4 Description of symbols
The symbol warns of hazards that can
lead to personal injury.
The symbol warns of dangerous voltage
that can lead to personal injury by elec-
tric shock.
Read the operating instructions carefully. Only for vertical use.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 Read first!
5.2 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.3 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.4 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
5.5 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.6 Electrical installation
WARNING!Safety hazard!
The product should only be installed by people with relevant electrical knowledge and experience! *)
If it is not installed properly, you risk:
■
your own life
■
the life of user of the electrical device
■
severe damage to property, e.g., by fire
■
personal liability for personal injury and material damage
Always consult an electrician!
*) Technical knowledge required to perform the installation:
For the installation, the following specialist knowledge is required in particular:
■
The “Five safety rules”: Disconnect from the mains; protect against accidental switch-on; ensure there
is no voltage; earth and short-circuit; cover or protect adjacent live parts
■
Use of suitable tools, measuring devices and personal protective equipment, where necessary
■
Analysis of measurement results
■
Use of electrical installation materials to meet the requirements for disconnection
■
IP protection ratings
■
Installation of electrical installation materials
■
Type of power supply (TN system, IT system, TT system) and the corresponding connection criteria
(classic earthing, protective earthing, necessary additional measures etc.)
If you are not a professional, do not do it yourself, have it performed by a specialist.
5.7 Product
■
Do not connect the product in series!
■
Do not operate the product while covered.
■
Take special caution when children are around. Children cannot recognize the danger arising from
the incorrect use of electrical devices. There is a risk of a life-threatening electric shock!
Important:
The product has an IP44 ingress protection rating. It is splash proof and suitable for outdoor use. Do
not submerge in water.
5.8 Sockets
■
The product is equipped with an enhanced protection against accidental contact. An integrated mech-
anism will release the holes of the receptacle only, if the two prongs of a power plug are inserted into
the two holes at once.
5.9 Drilling
When penetrating the surface (example: drilling or inserting fasteners), make sure no cables
or pipes are damaged. Inadvertently penetrating electric cables causes the life-threatening
danger of an electric shock! Check for concealed wires and pipes before drilling or inserting
fasteners.
6 Installation tools
The following tools are required for installation.
ø6 mm
7 Installation
Important:
■
Safe installation requires specialist knowledge. Installation must be carried out by a specialist who
is familiar with the electrical and mechanical installation requirements specific to the product.
■
Only install the product vertically.
1
2
3
Remove the mounting bracket.
80 mm
80 mm
35 mm
OFF
N
L
40 mm
7 mm
Switch the power supply to the product OFF.
Use a ruler or the bracket to mark where to drill.