Instructions

Model identier(s): NDF1822
cfvvv Item Symbol Value Unit Item Yes / No
Heat output Type of heat input, for electrical storage local space heaters only (select one)
Nominal heat output Pnom 0.8 kW Manual heat charge control, with integrated thermostat No
Minimum heat output (indicative) Pmin 0.4 kW Manual heat charge control with room and/or outdoor temperature feedback No
Maximum continuous heat output Pmax,c 0.8 kW electronic heat charge control with room and/or outdoor temperature feedback No
Auxiliary electricity consumption Fan assisted heat output No
At nominal heat output elmax N/A kW Type of heat output/room temperature control (select one)
At minimum heat output elmin N/A kW Single stage heat output and no room temperature control No
In standby mode elSB 0 kW Two or more manual stages, no room temperature control Yes
With mechanic thermostat room temperature control No
With electronic room temperature control No
With electronic room temperature control plus day timer No
With electronic room temperature control plus week timer No
Other control options (multiple selections possible)
Room temperature control, with presence detection No
Room temperature control with open window detection No
With distance control option No
With adaptive start control No
With working time limitation No
With black bulb sensor No
Contact Conrad Electronic SE
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *2144957_v1_0719_02_dh_m_en(2)
Care and cleaning
Before cleaning the heater, check that it is disconnected from the mains and ensure that it
has cooled down to room temperature.
Do not clean the heater with water, as this may cause an electric shock. Do not immerse
the heater in water!
Use a damp, lint-free cloth to clean the exterior casing. If the heater gets wet, leave it to dry
out completely before using it again.
Use a vacuum cleaner to remove dust that accumulates on the air outlet.
Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
could damage the casing or cause the product to malfunction.
Disposal
Electrical devices are recyclable waste and must not be disposed of in household
waste. Always dispose of the product according to the relevant statutory regulations.
You thus fulll your statutory obligations and contribute to the protection of the
environment.
Technical data
Input voltage ................................. 230 V/AC, 50 Hz
Power ........................................... Max. 810 W
Heat level I: 400 W
Heat level II : 800 W
Heating element ........................... Quartz
Tip-over switch ............................. Yes
Protection class ............................ 1
Cable length ................................. 1.4 m
Operating conditions ..................... -4 to +50 °C, 10 – 90 % relative humidity (non-condensing)
Storage conditions .......................... -10 to +55 °C, 10 – 90 % relative humidity (non-condensing)
Dimensions (W x H x D) ............... 320 x 385 x 285 mm
Weight .......................................... 1.84 kg