Instructions

32
b) Wall Mounting
Make sure no cables or pipes are damaged when drilling mounting holes or securing the screws. If in doubt
abouthoworwheretomounttheheater,contactaqualiedprofessional.
 Considerthepowercablelengthwhenchosingalocationformounting.Donotuseanextensioncord.
The supplied screws and wall plugs are suitable for solid walls.Please use suitable screws and wall plugs
forothertypesofwalls.Ifindoubt,contactaqualiedprofessional
The hook mounts are pre-assembled on the back of the heater. Use an 8 mm diameter drill bit to drill the
holes for the plastic dowels.
30 cm
30 cm
30 cm
30 cm
The heater should be mounted so there is at least 30 cm
clearance from the ground, adjacent walls, and ceiling.
• Use the included drilling template paper to mark the position for the top two holes.
 Usealevelertomakesureitisperfectlyhorizontal.
• Drill two holes (ø8 mm) and insert the dowels.
• Insertthescrews,leavingtheminimumamountofspaceprotrudingforthemountstohookonto.Theyshouldhook
behindtheheadofthescrew,notoverthetop.
v •