Instructions

k) Setting the activation tone for outputs #1 and #2

By default, the combination lock emits a long beep when one of the outputs is activated (e.g.

when a valid user code is entered).

This tone is normally used to signal that the door opener is activated (especially for

door openers that do not make a noise when they are activated).

If desired, you can change the signal tone to two short beeps or disable it entirely (e.g. when

usingthelockinaquietofceoratnight).

Proceed as follows:

• The combination lock must be in programming mode (see section 12 a for details).

• Enter programming code .

• Select the desired function.

No signal tone

Two short beeps

One long beep (default setting)

• Press the buttontoconrmyourentry.Thecombinationlockwillbeeptwiceandthemid-

dleLEDwillashtwotimestoindicatethatthesettinghasbeensaved.