Instructions

Setting output #1 or #2 to toggle mode with a shorter code (2 digits):
Inthismode,youcanenterthersttwodigitsoftheusercodetoenabletogglemode.Thefull
usercodemustbeenteredtodisabletogglemode.Thiscanbeusedtoallowofcestafftoturn
on the alarm system using a shorter code whilst ensuring that the alarm can only be turned off
by security personnel.
Proceed as follows:
• The combination lock must be in programming mode (see section 12. a) for details).
• Enter the programming code for output #1 or #2:
Set output #1 to toggle mode with a shorter code
Set output #2 to toggle mode with a shorter code
• Press the buttontoconrmyourentry.Thecombinationlockwillbeeptwiceandthemid-
dleLEDwillashtwotimestoindicatethatthesettinghasbeensaved.
Example: Set output #1 to toggle mode with a shorter code (2 digits):
(a) (b)
(a) Set output #1 to toggle mode with a shorter code (2 digits)
(b) Savesthesetting(thelockwillbeeptwiceandthemiddleLEDwillashtwotimes)
Function in normal mode:
For example, if you entered code "42" to enable toggle mode, and the user code for output #1 is
"62581", you can activate the output as follows:
Activate output #1
Disable output #1
Toenableoutput#1,enterthersttwodigitsofausercode.Thefullusercodeisrequiredto
disable the output.
You can also activate/disable the output using the full superuser code.
92