Instructions

g) Visitor code

Visitorcodesarespecialaccesscodesthatcanbeusedonceorforaspeciedperiod.Youcan

save up to 10 visitor codes.

• Single-use code: Output #1 will be activated when a valid visitor code is entered. The code

can only be used once.

• Code with a time limit: The visitor code can be used an unlimited number of times during

thespeciedtimeperiod(01-99hours).Afterthisperiod,thecodeautomaticallybecomes

invalid.

For security reasons, all visitor codes are automatically deleted in the event of a power

cut.

Saving visitor codes:

• The combination lock must be in programming mode (see section 12. a) for details).

• Enter programming code .

• Enter one of the 10 available memory slot numbers ( ..... ).

• Choose the type of visitor code:

Single-use code

..... Time limit of the visitor code in hours (01.....99 hours)

• Enter the desired 4 - 8 digit visitor code.

Important!

In "Auto entry" mode (see section 12. m), all codes must be the same length (e.g. if

the master code is 5 digits, the user codes must also be 5 digits).

• Press the buttontoconrmyourentry.Thecombinationlockwillbeeptwiceandthemid-

dleLEDwillashtwotimestoindicatethatthevisitorcodehasbeensaved.