Instructions

Deleting user codes:

User codes can be deleted if you want to prevent a user from accessing the door (e.g. when an

employee changes departments or leaves the company).

You can also overwrite existing user codes with a new code.

Proceed as follows:

• The combination lock must be in programming mode (see section 12. a) for details).

• Enter the programming code for output #1 or #2:

Output 1

Output 2

• Enter a memory slot number.

..... 100 memory slots for output 1

..... 10 memory slots for output 2

• Press the buttontoconrmyourentry.Thecombinationlockwillbeeptwiceand the

middleLEDwillashtwotimestoindicatethattheusercodeofthecorrespondingmemory

slot has been deleted.

Example 1:

To delete user code in memory slot no. 22 for output #1:

(a) (b) (c)

(a) Select output #1

(b) Memory slot number = 22 (possible for output #1 is 00 - 99)

(c) Deletesthecode(thelockwillbeeptwiceandthemiddleLEDwillashtwotimes)

Example 2:

To delete user code in memory slot no. 5 for output #2:

(a) (b) (c)

(a) Select output #2

(b) Memory slot number = 5 (possible for output #2 is 0 - 9)

(c) Deletesthecode(thelockwillbeeptwiceandthemiddleLEDwillashtwotimes)