Instructions

10. Beeps and LED indicators

The three LEDs on the front of the combination lock (see diagram in section 7, positions A, B

and C) have the following functions:

Red LED (A)

Turns on when output #2 is activated.

Amber LED (B)

Conrmsbuttonpressesandindicatesfunctionstogetherwiththebuilt-inbuzzer:

Status Beeps * Status LED

Normal mode - Flashes once every two

seconds

Programming mode is enabled - LED stays constant

Button press 1x short beep 1xshortash

Correct code 2x short beeps 2xshortashes

Wrong code 5x short beeps 5xshortashes

DAP jumper was not reset to the

default position ("OFF")

Constant short beeps Constantshortashes

Output is activated 1x long beep ** LED turns on for one

second

* The beep tones for entering a code can be disabled (program code 83).

** The long beep tone (indicating an active output) can also be disabled (program

code 81).

Green/red LED (C)

The LED turns green when output #1 is activated.

If output #1 is locked, the LED turns red.