Instructions

• Usethe"BACK-LIT"jumper(H)tocongurethebuttonbacklightsettings:
- "AUTO": The backlight switches on at full brightness when a button is pressed and switch-
es off automatically after 10 seconds of inactivity.
- "FULL": The backlight stays on at a low brightness and switches to full brightness when
a button is pressed. After 10 seconds of inactivity, the backlight dims automatically and
stays constant.
• Attach the combination lock to the mounting plate, ensuring that the cables do not become
trapped.
• Toxthecombinationlockinplace,insertthetwomountingscrewsandtightenthemusing
the L-shaped tool provided.
72