Instructions

f) Code for silent alarm (duress alarm)
The following section only applies to single user mode. For instructions on multi-user
mode (default mode), refer to section 12.
• The combination lock must be in programming mode (see section 12. a) for details).
• Enter programming code .
• Enter the desired duress code, e.g. .
In single-user mode, the duress code must be four digits long. As mentioned in section
13,youcanonlycongureoneduresscode.
• Press the buttontoconrmyourentry.Thecombinationlockwillbeeptwiceand the
middleLEDwillashtwotimestoindicatethatthecodehasbeensaved(theoldcodewill
be overwritten).
g) Visitor code
The following section only applies to single-user mode. For instructions on multi-user
mode (default mode), refer to section 12.
• The combination lock must be in programming mode (see section 12. a) for details).
• Enter programming code .
• Choose the type of visitor code:
Single-use code
..... Time limit of the visitor code in hours (01.....99 hours)
• Enter the desired visitor code, e.g. .
 Insingle-usermode,thevisitorcodemustbefourdigitslong.Youcanonlycongure
one visitor code in single user mode.
• Press the buttontoconrmyourentry.Thecombinationlockwillbeeptwiceand the
middleLEDwillashtwotimestoindicatethatthecodehasbeensaved(theoldcodewill
be overwritten).
107