Instructions

p) Conguring an open door warning tone
You can set the combination lock to beep when the door is not closed within a certain time
period.
Before using this feature, ensure that you have connected a door sensor (with NC
contact) to the corresponding input on the combination lock (see instructions on termi-
nal 14 in section 6).
Proceed as follows:
• The combination lock must be in programming mode (see section 12. a) for details).
• Enter programming code .
• Select the desired function:
Warning tone off
..... Activation of the warning tone after 1.....999 seconds
• Press the buttontoconrmyourentry.Thecombinationlockwillbeeptwiceandthemid-
dleLEDwillashtwotimestoindicatethatthesettinghasbeensaved.
The warning tone will stop when the door sensor registers that the door has been
closed.
Example: Warning tone activated when the door has been open for 30 seconds
(a) (b) (c)
(a) Programming code
(b) 30 second delay
(c) Savesthesetting(thelockwillbeeptwiceandthemiddleLEDwillashtwotimes)
For example, if someone opens the door with a valid user code and holds the door
open with an object, the combination lock will give off a warning tone after 30 seconds.
The warning tone will stop when the door is closed.
103