User manual

Add New Device To App
During set-up make sure to keep the
mobile device running the app and the
smart device within receiving distance
of the wireless access point.
1. Connect your mobile device running the
app to your WLAN network.
2. Open the app and navigate to the landing
page.
3. Touch
if it is not already selected.
4. Touch +.
5. Select the device you want to add.
6. Perform a Hard Reset on the device.
Instructions on hard resetting either can
be found in this manual or in the hardware
manual.
7. Follow the on-screen instructions in the
app.
8. When you see the conrmation notication,
the device appears in the device list.
9. Add more devices or exit.
It is strongly recommended that you
set up your router or access point
(AP) to use WPA2-Personal with PSK
encryption for authentication.