Instruction Manual

15
Acquiring GPS Position
If there is no GPS signal, the GPS signal indicator on the left side of the screen
will show empty bars. This can happen under any of the following
conditions:
■
The device is in a tunnel or at a location
where signals from the GPS satellites are
obstructed by buildings, trees, electric
cables or other objects.
■
Device system settings or Product
Settings are set incorrectly.
You can check and configure GPS settings in:
Menu > Settings > Hardware, and
Menu > Settings > Battery management
Navigating to a Point of Interest
In addition to the road network, the map also stores the details of thousands
of Points of Interest (POIs) such as gas stations, restaurants, hotels, tourist
attractions and other facilities.
To set POI as your destination, you have multiple options:
- Menu > Navigate to… > Address or POI will find POI near the
selected address.
- Menu > Navigate to > Nearby POI shows a list of POIs near your
current (or last valid) position.
- Select a position in Map Browsing Mode and choose Nearby POI
from Action Menu
- In a Map Browsing Mode tap directly on POI you want to select and
choose desired action from Action Menu.