User manual

Navigating to GPS Coordinates
Your first step before entering GPS coordinates in the search bar will lead to the clearing of the pre-
defined country. Tap the “x” icon at the end of the line to do this. Once done, please enter your GPS
coordinates. You can enter them in one of the supported formats:
• Degrees – 0.0
• Minutes – 0.0’0
• Seconds – 0.0’0”
Please note that your preferred formats from the list above need to be set in Menu > Settings > Regional >
GPS Coordinates. Once you start entering the longitude coordinate, Sygic will start giving suggestions for
your destination. These will of course not be coordinate suggestions, but actual addresses.
Menu Select Settings General Regional GPS Coordinates options
To enter South latitude and West longitude coordinates, you need to either enter the S and W letters
before the actual coordinates separated by a space, or by entering the negative (-) sign at the start of the
coordinate.You can also copy and paste the coordinates from external sources directly into the search bar.
Select search Clear the search field Search field must be clear
Suggestions will start
appearing
Destination address
Sygic Sygic GPS Navigation for Windows Phone - English
Last update: 2015/03/20 15:45:27 Page 51 of 93